Water Valve with 2 Inlets and 3 Outlets

PartSelect Number PS1482392

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • No hot or cold water.
  • Will not fill with water.
  • Compare At

    $91.48
  • You Save

    $15.25
  • Your Price

    $76.23
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 2 reviews What's this?
1-2 of 2
 

24 of 26 people found this instruction helpful

Parts Used

  • Water Valve with 2 Inlets and 3 Outlets

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers

CustomerMiguel from Jacksonville FL

The washer stop and blinks in the rinse mode

I called a repair person to check my 15 months old GE front loader washer that stopped in rinse mode. After his inspection he said it was a deffected computer board and it would be very expensive to replace the 3 computers boards inside and it would be cheaper to buy a new top loader washer. The next day I lifted the top cover and found a taped plastic envelope with instructions titled “For service Technicians Only." On page 2, instruction on to how to enter the washer in to service mode and to test the washer:
Press : Signal, Delay, Signal, Delay (within 30 seconds of plug in washer)
Then rotate main knob to #102 and press Start:(the washer did a test for finding the problem) , and for me was : E22 , it means : replace solenoid valve assembly.
So I order the part from Partselect.com for $58.00 and my Washer runs beautiful, thanks to the instructions inside.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 13 people found this instruction helpful

Parts Used

  • Water Valve with 2 Inlets and 3 Outlets

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerFelipe from Houston TX

Stops at rise

removed 5 screws, unscrew two more screws, remove the houses and disconnect the wires remove the watter valve.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2