1482391-1-S-GE-WH13X10027        -Triple Water Inlet Valve
1482391-1-S-GE-WH13X10027        -Triple Water Inlet Valve 1482391-2-S-GE-WH13X10027        -Triple Water Inlet Valve 1482391-3-S-GE-WH13X10027        -Triple Water Inlet Valve

Triple Water Inlet Valve

PartSelect Number PS1482391

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will not stop filling with water.
  • Leaking.
  • Will not fill with water.
  • No hot or cold water.
  • Compare At

    $60.24
  • You Save

    $10.04
  • Your Price

    $50.20
In Stock
Order within the next 11 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 3 reviews What's this?
1-3 of 3
 

20 of 21 people found this instruction helpful

Parts Used

  • Triple Water Inlet Valve

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerJohn from Mt. Pleasant SC

Water was very slow filling and relay hummed loudly.

Disconnected electrical power plug and two water inlet hoses Removed three screws holding control panel to back panel. Slid control panel sideways then tilted forward to expose inlet valve. Removed the two clip wiring connections and two hold down screws. Compressed the spring clip on the outlet hose and slid it off the valve. Installed the new valve in reverse order. Reinstalled the control panel and three attachment screws. Reconnected the water hoses and plugged the electrical cord back in. Started wash cycle to check out. It now fills properly. Problem solved!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 8 people found this instruction helpful

Parts Used

  • Triple Water Inlet Valve

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers

CustomerDon from Dahlonega GA

Water keeps running into machine even after it finished the cycle.

Removed the old part put it in the trash, installed the new part. Very easy repair to make.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

  • Triple Water Inlet Valve

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Socket set, Wrench(Adjustable)

Customermike from hampton VA

There was no water filling the tub.

unpluged the machine.undo the hoses off the machine took the back plate off to were I could access the triple water inlet took off the two wiring adators,and the hose that was on the triple water inlet then the two phillipshead screws. throw the bad one in the trash.and then put everything back together

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3