The triple water valve or inlet valve in your washer connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your washing machine continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | No hot or cold water
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH13X10026 replaces these:
AP3995044, 1264510
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
4.8
Filter By Rating:
5 Stars
5
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Roger R - June 9, 2021
Verified Purchase
Easy 15 minute repair. simple
The part fit perfectly.
★★★★★
★★★★★
Glenn C - May 24, 2020
Verified Purchase
easy repair part worked. perfectly
everything worked out
★★★★★
★★★★★
Wanda H - October 25, 2018
Verified Purchase
I repaired my own washing machine!!!!
I am 70 yrs old and I repaired my own washer just by googling the problem, ordering the problem part a water intake valve and followed directions. I saved all repair costs by doing this myself.
★★★★★
★★★★★
Edgar A - October 10, 2018
Verified Purchase
Valve replacement
The part fit exactly as described in the part select video. I was able to install in 10 min and it fixed one of my problems. I also seem to have an issue with the pressure switch which i'm ordering today.
★★★★★
★★★★★
Jeffrey N - March 8, 2018
Verified Purchase
Arrived broken
Evidently damaged in shipping. Customer service was great! They refunded my money and sent a return address label to ship the part back. I would not hesitate to do business with these folks again. Have ordered many parts over the years, always a good experience.
★★★★★
★★★★★
David M - January 25, 2018
Verified Purchase
easy fix
valve fit the connector and mounting screws lined up all is well whit my washer now !
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
water kept flowing even after cutting the power to the machine
followed instructions on you-tube. shut off water faucets. disconnect hoses from washer. remove three hex screws from back of control panel. lean panel forward and slide to the right, then remove it and lay it down. remove the two screws that hold the valve to the machine. use pliers to slide the clamp back and remove the hose. repea
... Read morets these steps in reverse to finish job. the first valve that partselect shipped leaked from the hot water hookup and was deemed to be defective. partselect credited my account before the part was at their warehouse. great service all around.
Read less
bryan from HARRIMAN, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer overflowing water wouldn't stop even when turned off or unplugged.
Turns out that water valve was bad but that's not the only thing I find out after I replaced that part my washer could not register what load size is on so there is bad pressure hose and pressure switch also. Easy unplug washer turn off water remove water supply hoses then unscrew the 3 screws that are holding control panel. Disconnect ol
... Read mored valve from the cable plug unscrew the screw that is holding water valve. Install new valve by placing it in the same place where the old one was screw the screw that holds the valve connect it to the cable plug connect water supply hoses plug plug in the washer back and turn on the water. Check for possible leaks and test your washer by choosing the smallest load.
Read less
Alisa from LAWRENCEVILLE, GA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer kept filling with water after it started agitating
There is a metal plate on back of the top of the washer held on by 3 screws. Removed them and that gave you access to the water valve. Water valve was fastened with 2 screws. Removed them and the hose that was connected with a clamp. Reversed the order on the installation and done. Whole job took 20 min. Now I know where to get parts. Thi
... Read mores site was awesome. Ordered the part on Tuesday, UPS delivered Thursday.
Read less
PETER from READING, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water over float
Very easy,thanks to partselect.good guess to found the problem and parts delivery on 2 days. Thanks again partselect .
Hector R. from Great meadows, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Russell
October 15, 2017
Friend,I have water dripping into the washer when the washer is not in use. Can you tell me what part might I most likely need?
For model number WCSR2090G3WW
Hi Russell, Thank you for the question. The most likley issues is the water valve. It can becomes "stuck" open and allow water to drip back into the tub. The valve is not repairable and will need to be replaced. hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Wendy
September 8, 2017
Cold water is real slow coming into washer,will this part fix my problem
Hi Wendy,
Thank you for the question. The first thing I recommend is turning off the water and removing the hoses, check the valve to make sure there is no build up in the screen. Sometimes the screen can have build up over time and slow the flow of the water. If it is all clear then I suggest replacing the water inlet valve.
Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
John
October 8, 2019
The water temperature entering the tub ranges from cold to lukewarm when it is on the hot was setting. When comparing the water temperature out of the kitchen faucet to the water running into the tub, the tub water is much cooler. Does the triple water valve have any thing to do with this? I.E. The solenoid, if there is one, is not opening correctly and therefore cold water or lukewarm water is entering the tub? Could the cold valve and hot valve be open at the same time?
For model number VLSR1090G8WW
Hello John, thank you for inquiring. Yes, it could possibly be due to the Triple Water Valve, this part number PS1482390 for your model. It would more likely be caused by a faulty Temperature Switch though, part number PS3499718. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paul
December 5, 2018
My washer fills to every level chosen excepy large.
Hello Paul, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Paul
December 5, 2018
The washer control fills every level except large
For model number gtwn4250d1ws
Hello Paul, thank you for your question. We would recommend replacing the pressure switch and hose, part number PartSelect Number: PS2354068 and PartSelect Number: PS272183. If this doesn't fix the problem the issue could be with the electronic board. I hope this helps!
Was this helpful?
Thank you for voting!
Dag
October 4, 2019
All I need is the screens. Where can I get those? I do not need the complete valve assembly.
For model number WH13X10026
Hello Dag,
Thanks for your question!
No, unfortunately, the manufacturer does not offer the screens separately for this part. You could try checking your local hardware store or contact GE at 800-626-2005 for a recommendation.
Best of luck, have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
