Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS1482380
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Removed clip from old knob with needle nose pliers and removed knob. Pulled indicator dial off of the timer shaft. Removed three screws with nut driver from top of back panel and opened control panel. One screw holds the timer mechanism in place. Unplugged wiring harness from timer and removed screw. Removed timer. There are tabs that the timer sits in. Make sure you have reinstalled the timer correctly in place. Installed new timer and replaced screw. Closed control panel and replaced the three screws in back panel. Slid indicator guide down over timer shaft making sure to line up the tab on dial with notch in nylon shaft. Slide know over metal shaft and replace the clip which holds the knob in place. Operate washer according to instructions. In the future be sure to turn your knob slowly when setting the wash cycle. Turning it too quickly can wear out or break the parts once more.
Help other customers find the most helpful instructions.
Were these instructions helpful?
First I removed the dials and the cover, removed the one screw that held the timer in place, disconnected the wireing harness and pluged it into the new timer set it in place and replaced the screw that held it in place,replace cover and dials. [ anyone could do it. ] Thanks,Tommy
i took the three screws off the back then pulled the clip off for the knob one more screw for the timer rotated it out it came easy Thanks part select for help
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.