Quick Question!

Have you ever purchased from PartSelect.com before?

1482375-1-S-GE-WH12X10338        -Timer
1482375-1-S-GE-WH12X10338        -Timer 1482375-2-S-GE-WH12X10338        -Timer 1482375-3-S-GE-WH12X10338        -Timer http://www.partselect.com/Schematics/GE/00122776i01.gif

Timer

PartSelect Number PS1482375

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will Not Start.

Compare At

$131.77

You Save

$21.96

Your Price

$109.81
Order within the next 9 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 5 reviews What's this?
1-5 of 5
 

26 of 29 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: lee from bethel, CT

Timer would not advance

removed control knob and dial with compression ring from front panel using 1/4in. nut driver removed 3 screws from rear of panel again using nut driver removed old washer timer unplugged wiring harness and reversed assembly took about 8 min.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

36 of 65 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: RICHARD from NEWARK, DE

Knob and timer di not work

remove back screws to control panel. unplug timer. pull bad timer out. snap new timer in plug in connector. reattach screws to control panel. put knob on timer

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Kirk from Golden, CO

It appears the machine came with the wrong washer control knob.

I damaged the timer gears trying to figure out the washer control knob. I ordered all necessary parts. It now appears the knob that came on the machine had different gear hobs than the timer. I replaced the timer. The dial then easily slipped on. Then the control knob with the clip attached pushed on to the timer. I had an extra timer knob clip. It was just 93cents so I may need it later. It works better now than it did new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 15 people found this instruction helpful

Parts Used:
  • Timer
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Customer: Roland from Picayune, MS

Bad timer

Manufacturers info for accessing the timer was vague and I ended up removing more of the shell than was necessary. Once the timer was exposed, the removal and reinstallation was quick and painless.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 5 people found this instruction helpful

Parts Used:
  • Timer
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: linda from berwick, PA

Funny thing nothing was wrong with the machine

someone as a cruel prank turned off the power strip and now i have a extra timer for if it ever goes bad.. LOL

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5