BBB A-Plus
1482328-1-M-GE-WH02X10237-SCR-1-4-20-MCH-HXW-5-8-S.jpg
1482328-1-S-GE-WH02X10237-SCR-1-4-20-MCH-HXW-5-8-S.jpg 1482328-2-S-GE-WH02X10237-SCR-1-4-20-MCH-HXW-5-8-S.jpg

SCR 1/4-20 MCH HXW 5/8 S

PartSelect Number PS1482328

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will not agitate
In Stock

  • Compare At

    $2.51

  • You Save

    $.42

  • Your Price

    $2.09
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-3 of 3

 

14 of 19 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerDiane from Zebulon GA

Agitator in washing machine not moving

First, I removed the liquid softner dispenser cup from the agitator. Next I gripped the bottom of the agitator and pulled straight up. This was the most difficult part of the repair. Next, I removed the couplier bolt with the appropriate size socket wrench. And then removed the couplier from the transmission shaft. This exposed the shaft. Upon receipt of parts from Part Select, I proceed to install in the reverse order. I slide the new couplier back onto the transmission shaft. and bolted down with new bolt using the original socket wrench. Next I slide on the new agitator making sure the "tongue and groves" matched. Then I placed the liquid softner cup back onto the new agitator. And with great joy my washer is working once more. Thank you Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 14 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench(Adjustable)

CustomerJared from georgetown KY

Agitator will not spin

Agitator would not spin and it was going to cost me I've a hundred soars for someone to come and fix it. I looked on this sight and found out what I thought was the problem and ordered four parts to fix it. I was amazed because they came in two days later. I started withe coupling which was the cheapest part and instaled it and it fixed it to return the other parts I called the 800 number and they emailed me a return authorization and I sent it back so it cost me 15 dollars and five minutes to fix it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers

CustomerMichael from Lebanon Junction KY

Agitator came off of spline and broke

The bolt that held the agitator assembly on had sheared off. Had to drill out the old bolt out of the spline. After that, it was very easy. Just bolt the agitator assembly onto the spline and it worked like a charm

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-3 of 3