| |
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLou from Pittsburgh PA
Broken knob
pull of old knob and ring. pull on the new one, it took about two minutes.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerSusan from Keyport NJ
Spinning control knob
I watched the video, used a needle nosed pliers to pull the clip off the knob and just pushed the new knob and clip on.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerCharles from Dallas GA
Control knob teeth were worn
I spoke to a very nice young ladie who took my order and I received my order within two days. I pull the clasp off of the old knob and replace the knob and the clasp with the new part and it now works great. Thank you for helping me find the part I needed.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerLouis from Cheshire CT
Plastic teeth on the old knob wore out, poor design.
Removed the old knob and installed the new one. Probably will need replacement again in another 3 years..
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
Customeralvin from gary WV
Knob was stripped
Unplugged the electrical cord and pulled the knob out and used a small mirrow to see and turn the clip to where it would slip off with the needle nose pliers. It took longer to find the mirror than to replace the knob.(lol)
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerHomer from Dayton OH
Timer would not work
First I prided clip from behindcontrol knob and knob poped off. New knob supply with new clip just push on job is done.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerJoy from Pipe Creek TX
The setting knob was broken and wouldn't engage
There is nothing to tell really. Took the setting knob off, put the new knob on. That was it, took all of five minutes.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerOsvaldo from Madison AL
Control knob was striped / cannot rotate dial
Remove control knob and replace it with new part.
One retaining clip to remove and replace part.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerMarie from Deltaville VA
The control knob teeth broke-could not move it easily
we took off the old control knob-pulls off-then replaced the plastic clip and popped it back on-now the teeth can move the knob to start the washer
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerMartin from Pemberville OH
Knob broke
took old clip off.put new knob on.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerChristine from Everett MA
Could not select cycle, knob teeth broken
pulled off plastic clip, removed knob. Put on new knob, put plastic clip back on
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
Customersandra from north windham CT
Control knob stopped working
watched video a couple of times and then did exactly as shown. surprise , i did it myself!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerDavid from Glendale AZ
Washer setting knob spins without changing settings.
I just wanted to note that the Timer Knob Clip comes with the control knob. I bought the extra clip, figuring I would snap the original one during reassembly. Turns out it was already included, but I don't mind having two spares around the house.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerCANDACE from AUSTIN TX
Teeth on the dial with ring broke/stripped
Used a bent paper clip to hook/remove the old plastic Timer Knob Clip, pulled off Control Knob and Dial. The dial was ok but was afraid it may have been stripped also.I then replaced them and used needle nose pliers to replace Timer Knob Clip. I always order extra clips because they are cheap and have learned a long time ago nothing ALWAYS goes perfectly and it was cheap plastic and sure as you know what I would have broken it and had to order another. Now I have a spare!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerEdward from Garden City NY
Cheap plastic grips to rotate knob broke off
removed plastic clip holding on knob, removed old knob, replaced with new knob and put new plastic clip back to secure.
|