Quick Question!

Have you ever purchased from PartSelect.com before?

1482196-1-S-GE-WE1M652           -Timer Knob
1482196-1-S-GE-WE1M652           -Timer Knob 1482196-2-S-GE-WE1M652           -Timer Knob http://www.partselect.com/Schematics/GE/00123007i01.gif

Timer Knob

PartSelect Number PS1482196

This knob will accept a D-shaped shaft.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will Not Start.

Compare At

$8.33

You Save

$1.39

Your Price

$6.94
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

70 of 93 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: McKinley from Meraux, LA

The knob broke and my daughter tried turning the end of the knob with a pliers which broke the end which disabled the timer.

I unscrewed the back panel took out the broken timer replaced it with new timer put on the new knob and screwed the panel back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

19 of 23 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Vanessa from Montebello, CA

The knob and timer knob broke, which disabled our dryer from working.

The replacement parts arrived and fit perfectly onto the metal part. It was super easy and now my Dryer is working again. I am so happy I saved myself from buying a new Dryer. My old one is as good as new!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Robert from escondido, CA

Problem turning the washer on and changing cycles

Removed the 4 screws holding the panel in place. Then removed the 3 screws holding the control asm in place. Removed 1 connector at a time installing the connector into the new assembly. Secured the controls asm with 3 screws. Then put the panel back on with 4 screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3