1482138-1-S-GE-WE18M25           -Lint Filter
1482138-1-S-GE-WE18M25           -Lint Filter 1482138-2-S-GE-WE18M25           -Lint Filter

Lint Filter

PartSelect Number PS1482138

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Takes too long to dry.
  • Unusual Noise.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 10 reviews What's this?
1-10 of 10
 

115 of 185 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:More than 2 hours

ToolsScrew drivers, Socket set

CustomerEdwin from Seattle WA

Dryer making grinding noises

We live in a Condominium, space is tight especially in the Utility room where the washer/dryer are located. Turned dryer breaker off at the electical panel.
Removed the top cover and front assembly w/door and front drum support, right where the unit was located. Had to gain rear access to loosen drum drive belt so undid the dryer vent hose to floor connection through a front acess hole. Moved the unit out to the breakfast nook as well as disconnecting the power cable from the wall socket. Removed the rear access panel covers and unhooked the drive belt. At the front removed the top screws off the lower cross member to allow spreading of the side covers to allow the removal of the drum. Removed drum and found the bearing bushing gone, reduced to powder.
Using the supplied instuction sheet, replaced the rear bearing assembly, replaced the drum after vacumming the whole interior and started the reassembly of the unit using the new belt and moved the unit back into place. Reconnected the power cable and dryer vent then lastly replaced the lint filter and selector knob. Closed the breaker and turned on the machine, no noise!!!
Incidently I am 78 years old. Thanks PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 10 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerKay from Ontario CA

A damaged filter had been put into the dryer

The part was delivered in record time. That was the best part. And it fit perfectly and was the correct color. The other filter was grey and the dryer is white. Thanks for being so efficient.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 5 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMark from Clarksville VA

Replacement of holed lint screen

straightforward swap, just form the top rail and click it in

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerWilliam from Leesburg IN

Only orderd two sliders needed four

easy no problem

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerbill from clarendon hills IL

Lint filter was broken

took out broken filter and replaced with new lint
filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerwilliam from simi valley CA

New lint filter

my problem was easy, i orderd a new lint filter, for a
dryer that is at least 10y/o. it came to me by FEDEX,
in 3 days. i threw out the old one and put in the new
one. easy peasy. i will say that this website had what i
wanted and got it to me very quickly. good job by
PARTSELECT......

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMonaLisa from Bronx NY

Horrible screeching noise when the dryer drum was in motion, cracked pieces were tangling and ripping the drying clothes.

I removed the top of the dryer (unscrewed from the inside to release the top). Removed interior screws to pull open the front of the dryer. Once inside, it was really visible that the old parts (front air duct top and bottom) were in bad shape. They were cracked and broken. I removed the old pieces (they pretty much cracked and crumbled right off). I snapped in the new pieces careful to avoid damaging the electrical connections and wires. Once snapped into place (top and bottom), I careful put the front back into place making sure that the dryer drum rested on the new pieces. All screws back in place and all done! Dryer is now working as new!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerFrank from Jacksonville FL

Old lint filter was cracked from use

Ordered new lint filter, received it in 2 days, removed old filter, snapped in new filter, patted myself on the back .

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerThomas from Bloomington MN

Broken dryer nob, broken lint screen.

Both parts arrived quickly and were exactly what I ordered. The lint screen replacement part was of higher quality and it works better than the one that came with the dryer. Very satisfied.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMARY from ERIE PA

Remove plastic and insert

inserted the lint catcher into the opening to replace the old one

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-10 of 10