This is a replacement upper spray arm with gasket for your dishwasher. The spray arm is made of gray plastic and is approximately 16.5 inches in length. The gasket is black in color and is approximately 2 inches in diameter. The upper spray arm rotates and sprays water while the dishwasher is running. Over time, debris and hard water buildup can clog the arm, and when this happens, the dishes may not be cleaned properly. If you inspect the upper spray arm and it is clogged or damaged, you may want to replace it. This is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD22X10050 replaces these:
AP3994684, 1263992
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.8
Filter By Rating:
5 Stars
3
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bobby Charles T - September 7, 2021
Verified Purchase
Perfect fit
Super fast shipping and the part fit. Couldn't be better
★★★★★
★★★★★
Ronald J - February 27, 2019
Verified Purchase
Part worked fine-Shipping was a problem
I ordered this part and received an entirely different one. Had to call and get that corrected. Once I explained the problem they shipped the correct part and within a few minutes of its arrival I had it installed and started the dishwasher with no issues. If there was an issue it was that our dishwasher was down for the extra 2 days until the second shipment arrived
★★★★★
★★★★★
Mike R - January 9, 2019
Verified Purchase
Great part
Parts came in a couple days later than was expected, but found out it was the mail carrier's fault. Would order from them again.
★★★★★
★★★★★
Jeff S - August 8, 2018
Verified Purchase
Easy Installation
Easy to repair sprayarm which I needed gasket for it. Just didn't fix my problem. Needed to clean filter screen where water supply comes in and dishwasher works like a charm now. Top rack of dishes now getting clean and spray arm is rotating. If you are having a problem with top rack getting clean you may not be getting enough water inside. Try dumping some extra water at bottom of dishwasher first and see how it runs. If it works good the water supply is the problem.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Gasket wore out and the spray arm fell off
Snapped on new spray arm...in less than 5 minutes.
Rosalie from GRAHAM, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Debbie
August 31, 2017
My wash arm has broken off. How do I install the new one?
For model number GLDA690P02BB
Hi Debbie,
Thank you for your question. First you will have to remove your upper rack. Once you have your upper rack out of the way, all you have to do is twist off the spray arm from where it is locked in place. There is no screw. You just twist the part off. I hope this helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
April 3, 2019
Can i get just the gasket for the upper spray arm ? When i took it off to clean the gasket was all bent up in there as it looked like it had been installed incorrectly when new .
For model number glda690mww
Hello Bill, Thank you for the question. Very sorry but the gasket is only sold as part of the upper Spray Arm, Part #: PS1481924. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
