Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS1481712
This part works with the following brands: GE, Hotpoint & Kenmore.
Unplug main power plug. Removed two philips head screws on the sides near the rear of the stove. Removed the four knobs and four switch brackets. Remove Panel Overlay. Remove two outer hex screws and remove Insert Panel for the controls. Do not remove the controls from panel! Pull Insert Panel out just far enough to remove the four hex screws for the Panel Control Assembly and the four hex screws for the Glass Maintop panel. Un-plug the 9-pin and 6-pin connectors for the burners. (Can't be put back together wrong!) Remove the Glass Maintop and place upside down on a table. Put the new Glass Maintop upside down next to it. Remove the hex screws that hold the burners onto the old Glass Maintop. With the help of another person, pick up the four burners and move them to the new Glass Maintop and reinstall hex screws. I would replace the Module indicator light, because the plastic clips will break off when removing it from the old Glass Maintop. Reverse the previous steps. Note; New Glass Maintop gaskets come with the new Glass Maintop.
Help other customers find the most helpful instructions.
Were these instructions helpful?
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.