Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS1481562
This is not the entire door just the outer frame.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Removed the screws at the top of vent and took the vent off and then removed the door by lifting it off the hinge. I had to break the old plastic door frame to get it off, but since it was no good anyway it didnt matter. Then I put the glass in the new frame put the handle on it and snapped the frame on to the door and put it back on the door hinge and then put the new vent on and screwed it down and closed the door. Job was not to hard at all.
Help other customers find the most helpful instructions.
Were these instructions helpful?
1)Removed upper vent bezel.2)Lifted door off hinges.3)Using putty knife, pried off inner trim ring.4)Remove two screws securing handle.5)Ease open clips and remove radiation screen.6)Remove outer glass from frame. (very easy, as door had broken in one corner)7)Reverse order. (when installing outer glass into frame, the frame must be carefully bent/pried to enable the retaining clips to clear the glass)
Followed instructions already on site. Somewhat difficult to remove inner trim ring. Need to be careful not to break this trim and also with positioning of glass.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.