12709820-2-M-GE-WB02X32720-HOLDER LOCKER
Part Location Diagram of WB02X32720 GE HOLDER LOCKER
See part 28 in the diagram
( Grid squares measure 1x1 inch )
12709820-2-S-GE-WB02X32720-HOLDER LOCKER Part Location Diagram of WB02X32720 GE HOLDER LOCKER
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

HOLDER LOCKER WB02X32720

 Fits your ZSA1202RSS01 Microwave!
★★★★★
★★★★★
3 Reviews

Rated by 7 customers 

A Bit Difficult 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 15.70
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your ZSA1202RSS01 Microwave!
PartSelect Number PS12709820
Manufacturer Part Number WB02X32720
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
Won’t turn on
This part works with the following products:
Microwave.
This part works with the following products:
General Electric, Hotpoint.
Part# WB02X32720 replaces these:
WB02X21788, WB06X10256, WB06X10857
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
3.7
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William G - December 18, 2021
  Verified Purchase
Worked great
Great delivery. Right part. Takes some time and care, but not really really hard. (A lot of wire harnesses to disconnect and keep track of. Take photos)
★★★★★
★★★★★
Kenneth F - July 28, 2020
  Verified Purchase
Part damaged in shipping
First part damaged in shipping. Second part also received damaged. Parts were shipped in a soft mailing envelope, even after my advice when ordering the second time to ship in a hard container. I am waiting for the part from a local vendor.
★★★★★
★★★★★
Richard Q - September 13, 2018
  Verified Purchase
Just like the original which I broke taking out a switch
Quick delivery, as advertised
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.6 / 5.0, 7 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Changing door switch
When removing a non-working door switch, you will see a hooked piece of plastic on the holder locker that looks like a latch. If you try to pull it back in order to either remove the bad switch or install a good one, it will likely break. Instead, you need to pivot the switch (It pivots on a little post which is fitted into a hole at the corner of the switch) out of position so that it is not held back by the 'latch'. Then lift the switch out. If you have to use lots of force anything, you're doing something wrong. Reverse all this when installing the new switch.
Read less
  • STEPHEN from MINNEAPOLIS, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not indicate closed
Disassembly control panel and remove switch holder; test for micro switches for continuity. Holder had broken post on micro switch holder.
  • David from CARY, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave fan would come on when the door was opened and light would turn on. Determine that the Main Interlock Switch had gone bad.
Replaced all 3 switches and Holder for all 3 switches. All is working great now.
  • Daniel from HOLMEN, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Holder bracket broken so Door swithch could not be activated
Part arrived next day! Thank you Parts Select. Holder bracket on older GE microwave was broken so MW would not start because door latch did not activate door switch. Removed front panel unplugged all the wiring (after I had taken a picture) to gain access to the holder bracket. Unplugged the three door switches. Removed two screws that held the holder bracket. Installed three new door switches into the new holder bracket. Positioned the bracket behind the frame and screwed back in the two screws. Snapped in this seven wire attachments, set the control panel back in the microwave and secured it with two screws. I only needed one screwdriver and one needle nose plier to remove the wire attachment from a door switch which made it easier to remove. 40 minutes.
Read less
  • David from MISSION VIEJO, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Received damaged parts
The first holder locker was shipped in a soft envelope and was damaged in shipping. I ordered a second holder locker with instructions to ship in a hard container and mentioned what happened to the first holder locker. The second holder locker was shipped also in a soft envelope and was received damaged.

I notified customer service and have yet to receive a response.

I now have the part on order with a local company.
Kenneth Files
(831) 688-0740
Read less
  • Kenneth from APTOS, CA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
When door was opened, the microwave would turn on.
Looked on line and found a you tube that said to check the door micro switches (there are three of them. Found one of the switches had an actuator that was stuck down. I got the actuator working but problem was still present. Another you tube showed how to repair the contacts in the switch and that solved the problem. however the plastic piece that holds the switches was broken and would not hold the switches securely. Ordered that piece and a new switch. Remove the vent plate on top (one phillips) and the control panel (one phillips). The switch holder is held in place with 2 phillips and is a little tricky to get it out and undo the wires. Once out, it's just a matter of putting the switches into the new holder and reinstalling it. Google the model number and the problem and there's virtually a you tube to repair ANYTHING.
Read less
  • David from HILTON HEAD, SC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The power was on but the Microwave would not start.
This is an above the range microwave, use 2 people to remove it. I set it on a table and removed the outer cabinet. I then used jumper leads to discharge the capacitor. I removed the control panel (taking a picture to ensure proper wiring on assembly), then I removed the latch board. Once I had the latch board out I removed the monitor switch (which is the middle switch) and tested it for continuity. This is a normally closed switch. I tested the other two switches as well and found these (normally open) switches for continuity to be good and the monitor switch to have a short. This switch should show continuity when the door is open and should show no resistance when the door is closed. (Take care removing the switches) After I received the parts I installed them in the new Locker Holder and installed the latch board (ensure to follow the latch board adjustment steps located in the control board). I then attached the wiring to the control board and then plugged in the unit. I tested the unit to ensure it functioned correctly. I then installed the outer cabinet, and then installed the unit above the range (Use 2 people for this process). Overall an easy fix you just need to ensure you follow safety procedures (especially when dealing with capacitors.
Take a lot of pictures of the wiring and of the components and take care with the latch board or you'll have to buy a new one when all you really needed is a monitor switch.
Read less
Other Parts Used:
HOLDER LOCKER SWITCH MONITOR INTERLOCK
  • William from KINGMAN, AZ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Primary Door Interlock Switch
$33.44
$33.44
  In Stock
SWITCH MONITOR INTERLOCK
$24.79
$24.79
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12709820
Manufacturer Part Number: WB02X32720
Brand
Model Number
Description
Hotpoint
CSA1201RSS01
Microwave
Hotpoint
CSA1201RSS02
Microwave
Hotpoint
CSA1201RSS03
Microwave
General Electric
CSA1201RSS04
Microwave - MICROWAVE
General Electric
CSA1201RSS05
Microwave - MICROWAVE
General Electric
CVM1750SH1SS
Microwave - MICROWAVE/HOOD COMBO
General Electric
CVM1750SH2SS
Microwave - MICROWAVE/HOOD COMBO
General Electric
CVM1790SS1SS
Microwave
General Electric
CVM1790SS2SS
Microwave
General Electric
CVM1790SS3SS
Microwave - MICROWAVE
General Electric
CVM1790SS4SS
Microwave - MICROWAVE
General Electric
CVM1790XS1SL
Microwave - MICROWAVE
General Electric
CVM1790XS2SL
Microwave - MICROWAVE
General Electric
CVM517P2M5S1
Microwave - Microwave/Hood Combo
General Electric
CVM517P2M6S1
Microwave - Microwave
General Electric
CVM517P2R1S1
Microwave - Microwave/Hood Combo
General Electric
CVM517P3M5D1
Microwave - Microwave/Hood Combo
General Electric
CVM517P3M6D1
Microwave - Microwave
General Electric
CVM517P3R1D1
Microwave - Microwave/Hood Combo
General Electric
CVM517P4M5W2
Microwave - Microwave/Hood Combo
General Electric
CVM517P4M6W2
Microwave - Microwave
General Electric
CVM517P4R1W2
Microwave - Microwave/Hood Combo
General Electric
JE1590BC01
Microwave - Counter Top
General Electric
JE1590CC01
Microwave - Counter Top
General Electric
JE1590SC01
Microwave - Counter Top
General Electric
JE1590WC01
Microwave - Counter Top
General Electric
JVM1533BD001
Microwave - Counter Top
General Electric
JVM1533BD002
Microwave - Counter Top
General Electric
JVM1533BD003
Microwave - Counter Top
General Electric
JVM1533BD004
Microwave - Counter Top
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
HOLDER LOCKER
$ 15.70
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.