Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jose
August 21, 2021
The cicle dry-spin it dosent work
For model number FFTW4120SW1
Hello Jose, Thank you for writing. The Clutch Body PartSelect Number PS12585163 is a common reason for it not to spin.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Diann Waller
September 29, 2021
Washer makes loud ratcheting noise when agitating, and won't spin out. Have replaced the agitator switch arm and balance ring. On to the clutch assembly or not? Please advise. Also curious about the sensor assy being the culprit.
For model number fftw4120sw
Hello Diann, thank you for your question. There is a few reasons your washer could make noise and stop during the spin or drain cycle. First, make sure the drain hose is not kinked and unplug your washer. It is also a good idea to remove the hose from the drain pump and check the pump and drain hose for any blockages. Your washer has a filtering device down and near the pump called a drain filter, check this filter for debris. You can test the drain pump with a multimeter. Unplug the appliance from the electrical outlet before you begin. Touch a probe to each of the terminals on the pump. A reading of zero or infinity, means the pump requires replacement. Part number: PS12176487. The belt on the pump or motor may also be worn or stretched. If there are visible signs of wear, replace the belt. Part number: PS12176483. If all of these parts check out, we recommend replacing the clutch, part number PS12176486. Good luck with your repair!