CNTRL-ELEC W11221359
Rated by 2 customers
Easy
30 - 60 mins
Ratings submitted by customers like you who bought this part.
- < Prev
- 1
- Next >
If you can fix things around the house, you can do this!
First, try resetting the touchpad by unplugging the refrigerator electrical cord for about 10 seconds, then plug it back in and try the touchpad. If it starts working you don’t need to replace it yet.
If it doesn’t work, order ... Read more the replacement touchpad and install it as follows. The one I ordered came with the low power control panel (#13). This repair takes about 30-45 minutes depending how much elbow grease is required to clean the old touchpad’s adhesive off the front panel. Read all the steps below first before attempting this repair.
Step 1. Unplug refrigerator electrical cord.
Step 2. Remove drip tray (#14) and remove two screws with nutdriver.
Step 3. Remove front panel (#11).
Step 4. Disconnect low power control board (#13) from all wiring harnesses.
Step 5. Remove low power control board (#13) from front panel (#11).
Step 6. Remove touchpad (#12) from front panel (#11).
Step 7. Clean adhesive completely from front panel (#11).
IMPORTANT: DO NOT USE ABRASIVES - use appropriate solvent (e.g. rubbing alcohol, Goo-Gone, Krud Kutter, etc.) to remove adhesive completely from front panel (#11) - DO NOT USE ABRASIVES.
Step 8. Mount new low power control board (#13) on front panel (#11).
Step 9. Very carefully align and mount new touchpad (#12) on front panel (#11).
IMPORTANT: Pull new touchpad wiring harness all the way through the opening to the back of the front panel (#11) before exposing the new touchpad’s (#12) adhesive backing. Mount new touchpad (#12) exactly where the old one used to be.
Step 10. Reconnect all wiring harnesses to low power control board (#13).
Step 11. Mount front panel (#11), install two screws with nudriver, and drip tray (#14) back on refrigerator.
Step 12. Plug in refrigerator and check operation of new touchpad (#12).
-
Larry from BELLEVILLE, IL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
-
Ken from Hixson, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
- < Prev
- 1
- Next >
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
3 people found this helpful.
3 people found this helpful.
1 person found this helpful.
1 person found this helpful.
- < Prev
- 1
- Next >
Manufacturer Part Number: W11221359
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.