Quick Question!

Have you ever purchased from PartSelect.com before?

12069099-1-S-GE-WR55X10942P-BOARD WITH CORE CHARGE
12069099-1-S-GE-WR55X10942P-BOARD WITH CORE CHARGE 12069099-2-S-GE-WR55X10942P-BOARD WITH CORE CHARGE 12069099-3-S-GE-WR55X10942P-BOARD WITH CORE CHARGE http://www.partselect.com/Schematics/GE/00125008i08.gif

BOARD WITH CORE CHARGE

Compare At

$299.11

You Save

$49.85

Your Price

$249.26
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12069099
Manufacturer Part Number WR55X10942P
Manufactured by GE

This board controls the operation of the unit. Note: This part has been updated by the manufacturer. It may differ in appearance but will function the same as the original.

This part works with the following brands: General Electric, Hotpoint.

This part works with the following products: Refrigerator.

This part fixes the following symptoms:

  • Will Not Start.
  • Freezer section too warm.
  • Fridge too warm.
  • Clicking sound.
  • Noisy.
  • Not dispensing water.
  • Fridge too cold.
  • Ice maker not making ice.
  • Fridge runs too long.
  • Ice maker won’t dispense ice.
  • Freezer not defrosting.
  • Fridge and Freezer are too warm.
  • Freezer too cold.
  • Too warm.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 144 reviews What's this?
 

2 of 3 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Marty from Aztec, NM

Clicking sound. Ice maker would not work and trip the braker if you tries to use it.

1. Pulled refrigerator out
2. Unpluged the refrigerator
3. Removed the three screws holding the cover on.
4. Removed Board ASM Main Control.
5. Unpluged Connector's.
6. Pluged Connector's in to new Board ASM Main Control.
7. Put cover back on.
8. Pluged refrigerator back in.
9. Pushed refrigerator back into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Pliers
Customer: WILLIAM from YUMA, AZ

Frige stopped cooling completely

i Removed back panels and then I removed the faulty circuit board. Installed new circuit board and presto everything worked. I can't believe how easy it was but on the other hand I couldn't believe a refrigerator had such a sophisticated part..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Pliers
Customer: Michael from Pacheco, CA

The evaporator fan in the freezer would slow down and speed up for a long period of time before eventually shutting down at the end of a cooling cycle.

Tom Paone at quality@applianceeducator.com. was very helpful at recommending that a solution to my problem was to replace the ASM Main Domestic Motherboard. I ordered and received the board in two days from PartSelect. After unplugging the refrigerator I used a nut driver to remove the three screws that held the motherboard cover in place and then disconnected all of the connections to the board. Next, using a pair of needle nose pliers, I gently squeezed on the white plastic anchor retainers that fastened the motherboard to the refrigerator. While doing this at each anchor I gently pulled on the motherboard until it was separated from the retainer anchor post. There were four retainers total. I removed the old board and in the reverse order installed the new board. All of the connectors were easy to match to the new board because the wiring connectors coming out of the back of the refrigerator were only long enough to hook to the correct connectors on the circuit board. There was an extra connector that I didn't use on the new board and also the connection for the ground wire used a ring connector instead of a spade connector. To remedy this I simply used the ground wire assembly from my old board. I also took the time to remove the lower cover on my refrigerator and cleaned the condensing coil with a vacuum cleaner. The total time to replace the motherboard and clean the condensing coil was about 20 minutes from start to finish. This repair solved the problem with my evaporator fan. A big thanks to Tom Paone at quality@applianceeducator.com. for helping diagnosis my problem and suggesting the correct replacement part. I saved between $100.00 to $150.00 not having to call out an appliance repair person to fix my refrigerator.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 6 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Kyle from Norwalk, IA

Whining noise coming from ge refrigerator

It was a very simple installation after reading about everyone else having the same "noise" problem with their GE side by side refrigerator.

I simply; pulled the refrigerator out, turned off the power, took off the 3 screws to remove the plate, unhooked the 5 or so connections with my hands, put the new part in, hooked the connections up, put the plate back on, plugged the refrigerator back in, and slid in back into place. It took around 10 minutes to do, very simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Very Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Jonathan from NEW ORLEANS, LA

Refrigerator and freezer would stop cooling. Would happen suddenly without warning. Reset of refrigerator would solve the problem and it would run fine for several days before doing it again.

Only tool I used was 1/4 inch socket. Using the 1/4 inch socket, the screws were removed from the panel covering the control board. (this is on the back in the lower right corner). When this panel is off you are looking at the control board. Next remove all the plug in connectors. Don't worry about remembering where they go. They all are different and can only go in their specific place. After removing the connectors, pull the board out. Replace the plug in connectors before putting the new board back in , then snap the board back into place.(held in by four pins). Replace the cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Cecilia from NATALIA, TX

Freezer would not freeze and fridge would not cool after power outages

I used a volt/ohm meter and checked for power to compressor and start run relays, diagnosis- was remove and replace motherboard

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Socket set
Customer: jaime from SYLMAR, CA

No cooling on either freezer or refrigerator

Everything seemed to be working right, but no cooling, so I tried turning on and off the switch that turns the light on 5 times within two seconds, refrigerator did not shot. so I removed the main board and I notice a short had taken place on one of the relay legs. I ordered the main board and replaced it. The main board is on the back of the freezer covered with a sheet metal panel about 8"x8" and is secured with hex sheet metal screws. Everything is working now. Please make sure to unplug the unit from power before removing the main board.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Carl from BELLVILLE, TX

Unit was dead

Removed and replaced control board

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Richard from Clarksville, GA

Electric surge from lightening strike close to house

Obvious that main electronic board was fried. Refrigerator and freezer both not working although fan was running. Replaced main board and run capacitor. Compressor not running. Pulled starter relay and checked compressor connections for continuity. Checked ok. Ordered starter relay and installed with new capacitor. Compressor started and has been running quiet and cold ever since. Thanks to videos on partsselect website for offering the confidence to try the fix myself. Total spent on parts and shipping,$350. I had electric provider install surge protection behind meter for a cost of $5.70 a month. Hope it works as advertised.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Aurelio from MAYS LANDING, NJ

Clickking sounds

Unplugged unit.. Removed control board cover.. Removed all plugs from control board then removed board its self.. Replaced in reverse order.. Unit is working as new..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Wrench (Adjustable)
Customer: Lloyd from MADISON, WI

Lost all power except light bulbs.

For the Main Control board: I took pictures of connectors and matched them to same numbered connectors on the new board, but it's hard to get it wrong, really. Since the old board zapped a hole right through the plastic sheet behind it, I made a new one with the original as a template. For the ice auger, I left the blades on the old, broken one til I was ready to swap them to the new one to keep them in order, and used a new nut though the old one probably would have still worked. The clear crusher cover plate does wiggle on the auger assembly, blades and all. Just be sure to take pictures to remember how it all goes together. The trickiest part is removing the crusher assembly without breaking plastic--only use just enough force to release the claws. You'll have to at least partly take apart the rod pieces underneath. I cleaned everything with warm, dish soap water and some white vinegar mixed in. Some parts I put in the dishwasher. This a good time to clean the entire frig, too. You may want to also have new water line connector hardware on hand, too, just in case it gets damaged/leaks if disconnected and reconnected for servicing. Always unplug the frig first to start. I used a small, indoor/outdoor temperature device to check the freezer and frig temps to check when done to make sure it worked. Finally, it really, really helped having a "loaner" frig during this time!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Joe from Stevensville, MD

Continuous clicking noise, compressor was not running

Removed the old control board at the rear of the refigerator, installed the replacement board.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Anthony from Yardley, PA

Freezer and refrigerator would get warm, followed by it getting cold again, doing this numerous times throughout the day.

After determining it was not a problem with the defrost cycle, ( this refrigerator had no separate defrost timer), I ordered the main circuit board with the hope that the relays built into it were hanging up and not properly turning on the compressor, (a chattering sound could be heard). Ten screws to take the access cover to the board off and a few connectors later and it was as good as new. Took about ten minutes!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Shelby from Sturgis, SD

Ice and water dispensers were not working, control board was making a clicking noise.

Disconnected power, removed screws from cover on back of refrigerator, unpluged wire connectors, squezzed four support fasteners and removed old board. Put new board on support fasteners, reconnected wiring, replaced cover, pluged power back in, turned controls back on. It wored fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • BOARD WITH CORE CHARGE
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Fred from Vineland, NJ

Circuit board was clicking and refrigerator was not working properly

narrowed it down to the circuit board...removed cover panel after unplugging frig. read directions thouroughly.... removed cables attached to old board. this is the tricky part removing the board from the plastic clips....broke two pulling old board off popped new Board onto remaining plastic mounting clips and reattached cables plugged frig in and got a shock as my shoulder touched the board. everything seemed to be working and but cover back on....viola all done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS12069099
Manufacturer Part Number: WR55X10942P
Brand Model Number Description
General ElectricA4425GDTABBRefrigerator
General ElectricA4425GDTAWWRefrigerator
General ElectricA4425GDTBBBRefrigerator
General ElectricA4425GDTBWWRefrigerator
General ElectricBSS25GFPACCRefrigerator
General ElectricBSS25GFPAWWRefrigerator
General ElectricBSS25GFPCCCRefrigerator
General ElectricBSS25GFPCWWRefrigerator
General ElectricBSS25GFPDCCRefrigerator
General ElectricBSS25GFPDWWRefrigerator
General ElectricBSS25GFPECCRefrigerator
General ElectricBSS25GFPEWWRefrigerator
General ElectricBSS25GFPHCCRefrigerator
General ElectricBSS25GFPHWWRefrigerator
General ElectricBSS25JFRFWWRefrigerator
General ElectricBSS25JFRJWWRefrigerator
General ElectricBSS25JFTAWWRefrigerator
General ElectricBSS25JFTBWWRefrigerator - T Series
General ElectricBSS25JFTCWWRefrigerator - T Series
General ElectricBSS25JFTDWWRefrigerator
General ElectricBSS25JFTEWWRefrigerator - T Series
General ElectricBSS25JFTGWWRefrigerator
General ElectricBSS25JFTHWWRefrigerator
General ElectricBSS25JFTIWWRefrigerator
General ElectricBSS25JFTJWWRefrigerator
General ElectricBSS25JFTNWWRefrigerator
General ElectricBSS25JSRFSSRefrigerator
General ElectricBSS25JSRJSSRefrigerator
General ElectricBSS25JSTASSRefrigerator
General ElectricBSS25JSTBSSRefrigerator - T Series