Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS120443
This door lock switch is two inches long. It is a black and metallic switch that carries 120 volts.
Removed old part with a pair of pliers and plugged the new part into place.Very simple and the self cleaning feature works again.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Replaced the selector switch the contact on the old selector switch were welded togather when the bake element shorted out .Thank for your help
First, DISCONNECT POWER or you can turn your panel into an arc welder. After that removed four screws that hold front panel in place and 2 screws that hold the display in place. disconnect ribbon cable and two other cables. Reverse operation for assembly.For the self cleaning problem, replace door lock switch by pulling forward, use needle nose to remove & replace connector. Push into place. Very easy. Total 10 minutes for both jobs
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.