Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kathy L - October 26, 2021
Verified Purchase
Great Part worked as expected
Ordered ice maker replacement for my kitchenaid fridge. Got what I ordered. I installed and it is working great.
★★★★★
★★★★★
Daniel P - June 12, 2021
Verified Purchase
Exact replacement !
My ice maker arrived in perfect condition, on time and was an exact match to the factory part. What could be better than all that PLUS great customer service, a helpful website and ease of ordering. PartSelect is my parts store!
★★★★★
★★★★★
Linda I - May 16, 2019
Verified Purchase
Ice maker for kitchen aid
The ice maker part came in fast but still no ice. For some reason the water isn't filling the tray.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
February 24, 2018
How do I remove the icemaker from the refrigerator door?
For model number KRFC704FSS00
Hello Greg,
Thanks for your question. Shut off power and water to the fridge. Use tape to shut the flipper cover on the left wall in front of the ice maker. Open the plastic cover in the front and slide it to the left and push up on the right side to release the plastic pin from the bracket. Remove the cover and the wire harness cover. Push in on the tab to the left of the icemaker to release it and slide it off its rails, then release the locking tab on the wire harness plug and pull the harness out of the plug. Remove the
icemaker. Place the icemaker module upside down on a flat surface and remove the screws that secure the mounting plate. Release the locking tabs on both sides of the wire harness plug and pull
the wire harness plug out of the mounting plate.
I hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Darrell
September 14, 2023
what caused my in door ice maker to fill with water and freeze solid?
For model number krfc704fbs00
Hi Darrell, thank you for reaching out. Based on our understanding of the issue, the water inlet valve of the refrigerator might be faulty. You may need to check the water inlet valve, part number PS11738056, to help fix this issue. We hope this sorts out your problem!
My ice maker is continuing to cycle through the ice emptying cycle. It is also making a lot of noise and really slows down at the end of the emptying cycle. It never fills, but the water still come out of the front
For model number Krfc704fbs00
Hello Peter, thank you for contacting us. Please check the water inlet valve, part number PS11738056, the auger motor, part number PS11723175, and the ice maker assembly, part number PS11769706. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!