Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Whirlpool/ADIANCFB.gif
See part 8 in the diagram
http://www.partselect.com/Schematics/Whirlpool/ADIANCFB.gif

Kickplate - Black

Compare At

$62.05

You Save

$10.34

Your Price

$51.71
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11769017
Manufacturer Part Number W10871196
Manufactured by Whirlpool

This part works with the following brands: KitchenAid, Kenmore, Whirlpool, Estate, Crosley, Roper.

This part works with the following products: Dishwasher.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 4 reviews What's this?
1-4 of 4
 

11 of 16 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Margaret from San Diego, CA

Wanted to change beige dishwasher front to black.

First , I went outside and turned the breaker for the dishwasher off. Next,I removed the screws that held the bottom 2 pieces, that rest on the floo,r in place. Then removed the two beige metal pcs. . Next I replaced them with the 2 black pieces I had ordered and secured them with the 2 black screws I had received as part of my order. Then I removed the scews from the inside of the door of my KitchenAid Dishwasher. This released both the front bottom panel and the control panel. . I took the beige bottom door panel off and moved the insulation piece from the back of thebeige panel to the back of the black panel. Then I intalled the new black panel I ordered and resecured it with two screws until I had finished with the control panel switch out.
I had to unplug an electronic tape from the inside of the beige control panel and plug the same tape back into the black control panel. I also had to remove the beige handle that was on the inside of the control panel, attached to the door, and replace it with the new black one I'd received. I then installed the black control panel and reattached it with screws and finished replacing the rest of the screws I had removed from the inside of the door.
I tested the handle to make sure it opened the door and locked it like it should and then went outside and turned the breaker back on. Came in and turned on the dishwasher and did a load of dishes. It looks awesome, matches the rest of my black appliances and I am very proud to have done it myself. I also wanted to thank the customer service lady who was so great to work with on the phone. I would shop with you again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 12 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Pam from Plainview, NE

No problems

Removed the old panels with a phillips screwdriver. Removed the control panel and put the door latch and the control board into the new control panel the same way they were in the old one. Also have instructions to follow if needed. Replaced the front panel and put the screws back in. The toe and access panels went in easy, the only thing we had to do was touch up those screw with black paint as there were not new black screws in the kit. It was an easy and simple process.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Marlon from Conroe, TX

Change color to black

Pulled toe panel and then electrical panels and handle and then front panel. It was a white appliance and i changed it to black. The people at part select was very helpful and friendly. I would do business with them in the future.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools:
Customer: Daniel from Germantown, MD

Merely switching from bisque to stainless steel

Removed the toe panel and replaced.
Removed the front panel and replaced.
Removed the control panel, disconnected the ribbon wiring and replaced with the new control panel. Reconnected the ribbon wiring and secured the panel with the six screws..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11769017
Manufacturer Part Number: W10871196
Brand Model Number Description
Kenmore665110739120Dishwasher
Kenmore665110739130Dishwasher
Kenmore665110739140Dishwasher
Kenmore665110739190Dishwasher
Kenmore66513012K111Dishwasher
Kenmore66513013K111Dishwasher
Kenmore66513014K111Dishwasher
Kenmore66513019K111Dishwasher
Kenmore66513023K111Dishwasher
Kenmore66513042K111Dishwasher
Kenmore66513043K111Dishwasher
Kenmore66513044K111Dishwasher
Kenmore66513049K111Dishwasher
Kenmore66513112K700Dishwasher
Kenmore66513113K700Dishwasher
Kenmore66513114K700Dishwasher
Kenmore66513119K700Dishwasher
Kenmore66513122K700Dishwasher
Kenmore66513122K701Dishwasher
Kenmore66513122K702Dishwasher
Kenmore66513122K703Dishwasher
Kenmore66513123K700Dishwasher
Kenmore66513123K701Dishwasher
Kenmore66513123K702Dishwasher
Kenmore66513123K703Dishwasher
Kenmore66513124K700Dishwasher
Kenmore66513124K701Dishwasher
Kenmore66513124K702Dishwasher
Kenmore66513124K703Dishwasher
Kenmore66513129K700Dishwasher