Quick Question!

Have you ever purchased from PartSelect.com before?

11757601-1-S-Whirlpool-WPY912709-Adjustable Peg Clip
11757601-1-S-Whirlpool-WPY912709-Adjustable Peg Clip 11757601-2-S-Whirlpool-WPY912709-Adjustable Peg Clip 11757601-3-S-Whirlpool-WPY912709-Adjustable Peg Clip http://www.partselect.com/Schematics/Maytag/53706.gif

Adjustable Peg Clip

PartSelect Number PS11757601

This dishrack clip is intended for use with dishwasher dishracks that have adjustable pegs. This clip is only about four inches long.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning dishes properly.

Compare At

$7.69

You Save

$1.28

Your Price

$6.41
Order within the next 5 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 37 reviews What's this?
31-37 of 37
 

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Joseph from Austin, TX

Bottom of silverware basket broken. Allowed untensils to hang down to stop the sprayer head.

Removed handle from old silverware basket using a pocket knife to unsnap the tabs. Then snapped handle on new basket.

Since ordering parts already, I took the opportunity to replace a broken clip on the adjustable peg section of the lower rack. This was a snap out/snap in operation and required no tools.

After replacing basket, sprayer head spins freely and dishwasher cleans dishes sparkling clean as it did when new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Adjustable Peg Clip
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Harold from Stanley, NC

Broken tray holders

Removed bottom tray and removed broken tray holders. Installed new tray holders.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Adjustable Peg Clip
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Dennis from Mansfield, MA

Rack would not stay in position

removed old clips , installed new ones, repair finished in less than 30 seconds. The parts arrived in less than one day. Fantastic service!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: cheryl from brandon, MS

Upper tray wheel strip broke. Lower adjustable plate rack clip broke

The most difficult part of the repair was to figure out how the two retaining clips at the end of the rack slides came out. Once those were removed, it was a simple matter of replacing the broken wheel mounting strip with the new one. A simple "place and clip-in repair process."
As for the repair of the adjustable clip. A simple "snap-in-place"repair was all that was needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Steve from Vienna, VA

Replaced broken plastic clips on pivoting rack

Despite being rather "un-handy" around the house, I was able to do the repair in just a few minutes with no tools and no new damage. First I carefully noted which plastic clips were in each position on the tray, drawing pictures before removing the old pieces. Then I unsnapped the pivoting rack from the broken clips, removed the broken clips, inserted the new clips, and re-attached the pivoting rack.

Now it works!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Leonard from Williamstown, VT

Tines wouldn't stay up

put them in place simple

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: Richard from Tampa, FL

Parts broken

installed new parts

Help other customers find the most helpful instructions.

Were these instructions helpful?   

31-37 of 37