Quick Question!

Have you ever purchased from PartSelect.com before?

See part 6 in the diagram

Spark Module

PartSelect Number PS11757582

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

This part works with the following brands: Amana, Jenn-Air, Caloric.

This part works with the following products: Cooktop, Range.

This part fixes the following symptoms:

  • Will Not Start.

Compare At


You Save


Your Price

Order within the next 3 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 1 reviews What's this?
1-1 of 1

24 of 36 people found this instruction helpful

Parts Used:
  • Spark Module
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Robert from Ranchos de Taos, NM

Burners kept clicking after ignited

After I bought this part, installed it and the clicking still did not stop I finally found the problem. If your ignitor can still click then it's still good. The problem is the electric connection between the head burners and the base burners (Top Assembly diagram). Put a little weight on the head burner while grabbing it with your hand and grind it into the base burner with a little twisting motion. Repeat for all 4 burners. Presto! (you could be more professional and use steel wool or sandpaper to.)
If you stll want to know how to install this part begin by removing the control panel bracket #24. Then remove the glass top w/seal #9 (after removing the knobs). You may have to tease this out because the rubber seal is sticky. The switch plate #14 comes off after removing 2 obvious screws at each end and 2 not-so-obvious star screws attaching it to the manifold #6. Remove the spark module by removing 2 of the 3 screws and sliding it out of the 3rd screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1