Quick Question!

Have you ever purchased from PartSelect.com before?

11757568-1-S-Whirlpool-WPY703147-Surface Burner Infinite Control Switch
11757568-1-S-Whirlpool-WPY703147-Surface Burner Infinite Control Switch 11757568-2-S-Whirlpool-WPY703147-Surface Burner Infinite Control Switch 11757568-3-S-Whirlpool-WPY703147-Surface Burner Infinite Control Switch http://www.partselect.com/Schematics/Maytag/33390.gif

Surface Burner Infinite Control Switch

PartSelect Number PS11757568

This surface burner infinite control switch is just over two inches long. It's shaft is one inch long, and is double flat. This switch is palnut mounted and the 'off'position is at the top.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.
  • Will Not Start.

Compare At

$71.11

You Save

$11.85

Your Price

$59.26
Order within the next 5 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 21 reviews What's this?
16-21 of 21
 

0 of 1 people found this instruction helpful

Parts Used:
  • Surface Burner Infinite Control Switch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Robert from Golden, CO

Burner won't get hot

It was very simple. detached front switch panel by removing 4 screws inside top of oven door. Removed knob from old switch and removed nut holding switch to panel. Rotated switch panel to expose guts. replaced wires from old switch to new switch, screwed new switch to panel, replaced old knob. idea came from previous story at this website. Works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Diane from Wilmington, MA

The element would not turn on due to a cracked switch. The element we bought was put in the left hand bay.

My electrician was here so he did it. I was not watching him.
The whole transaction with you was impressive. The shipment was lighting fast and the product was perfect. We will be back in the future when we need other parts. Thank you for doing such a great job.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers, Wrench set
Customer: Victor from San Jose, CA

Burner was not heating

Took everything apart and replace the new parts but what I really want to share is the prompt shipment of my parts, I'm very satisfied and I will recommend the web site (THANK YOU)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Surface Burner Infinite Control Switch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jon from GREENFIELD, AL

Switch body that supports mounting nut broke

removed cover, pulled out old switch, moved each wire from old to new switch, mounted switch, replaced cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Surface Burner Infinite Control Switch
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Alan from Alpine, CA

Wife left burner on

Replaced switch.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
  • Surface Burner Infinite Control Switch
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: David from Willow Grove, PA

Burner switch would only stay on hi

Replaced the switch.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-21 of 21