Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11757048
This is the center support rail for the refrigerator crisper drawer. This rail supports center of the crisper frame.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
A very easy fix took all of five minutes
Help other customers find the most helpful instructions.
Were these instructions helpful?
removed old rail,lifted glass panel above and inserted new rail-voila!!done.
I removed the glass top and then rail and frame.I had to remove the gaskets from the old frame and put them on the new one.The steel support and the slide mechanisms were difficult to remove. I needed a screwdriver to do this.Some directions would have helped here.It was easier to snap them back into the new frame.I set the frame and then rail back into the refrigerator,replaced the glass.
Removed the drawers and shelf unit above the shelves. Installed the new rail and put the shelf unit and drawers back in. Less than 5 minute repair. Very fast delivery of part and reasonable pricing.
Took drawers out, inserted the rail and put the drawers back in and voila. Fixed.
I removed the crisper drawers, glass shelf, and frame assembly to install the ladder hook. Before reinstalling the glass shelf on top of the crisper frame, I installed the center crisper rail.Thank goodness for websites like this!
I was easily able to find the part using the online search. I order the part and it arrived in about two days. Installing the part meant pulling out the two crisper drawers, emptying the shelf above the crispers, removing two glass shelf plates, inserting the new part, replacing the glass plates, replacing the food on the shelf and sliding in the two crisper drawers. All in all, about 3 minutes.
I first removed the bottom shelf. Then I popped the rail in. It was pretty easy although I did have to use some force to fit it in. Ordering the part and doing it myself was a lot cheaper than calling the repair man.
Repair was a piece of cake. My only wish would have been a little more informed on a few other parts I could have replaced as well. It obviously would have increased my cost, but would have simplified the install process, and still would have been cheaper then calling a service guide. I would recommend buying and installing the new gaskets when doing this. And possibly the steel support bar that goes threw the plastic shelf. Removing that bar was the most difficult task, difficult only that if you used to much force, SNAP!! and then your pissed! and have to start all over.
Very easily removed top shel glass above crisper--removed old rail by lifting up--and place new one in slots provided---simple!! Part was delivered in less than 3 days-------very fast and cheap !!!
It took longer to empty the glass shelf above the Crisper Bins than to replace the rail. Since the part simply snaps in place, no tools were required
You need to lift up the glass part and simply fit it the center rail in, very simple
I took all items off the glass shelf. Removed the two crisper drawers. Removed the glass shelf. Installed the center rail. Replaced the two crisper drawers, the glass shelf and all items. Job done in less that 1 min. Thank you for great customer service and quick delivery.
got the new part, took the old part out and snapped the new part in! Very easy. Thank you.
I removed the crisper pans, installed the new rail and then installed the new bins. Very easily done--I was finished in 10 minutes
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.