Quick Question!

Have you ever purchased from PartSelect.com before?

11757044-1-S-Whirlpool-WPW10670845-Ice Bucket
11757044-1-S-Whirlpool-WPW10670845-Ice Bucket 11757044-2-S-Whirlpool-WPW10670845-Ice Bucket 11757044-3-S-Whirlpool-WPW10670845-Ice Bucket http://www.partselect.com/Schematics/Maytag/SZ9F5XUH.gif

Ice Bucket

PartSelect Number PS11757044

Bucket only. All other parts sold separately. This part holds the ice once it's released from the icemaker.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$59.66

You Save

$9.94

Your Price

$49.72
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

16 of 34 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Kenneth from Phoenix, AZ

Ice coming out dirty looking

pulled out a couple scews, unplugged wiring
harness, pulled out old ice maker.
took new ice maker plugged in wiring harness
tightened down screws. had clean ice in 2 hours!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 26 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Robert from Valencia, CA

Ice maker's ice tray coating coming off, ice bin had foul odor.

I noticed the coating inside the ice maker, the lining on the surface that the water contacts when making ice, was chipping off. I replaced the ice maker with a new unit and now there's no more bits of stuff in my ice. The other problem I had was the ice bin, it had picked up a weird smell over the years and I wanted to replace it. The new bin seems flimsier, but works fine. It didn't have the top attachment hole for the ice auger mechanism drilled out for some reason, it had a little "bump" in the plastic where it should be, but was never drilled out. Easy enough, I drilled the hole out and attached that top screw without any issue.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2