Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Guy
November 18, 2017
Part number ps11756848 burned out. I want to order and replace it but I'm concerned there may be an under lying cause for it to burn out. Please advise accordingly.
For model number WDF530PLYB3
Hello Guy, Thank you for the question. Normally if this part burns out there is no underlying cause, just a defective board. As long as there is no visible damage to the ribbon harness that plugs into the board you should be fine to replace the part. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
June 29, 2021
Everything works perfectly except the clean light does not illuminates when cycle ends. Easy way to troubleshoot or isolate problem? Controller is too expensive to replace for this. Any other ideas? Thx!
For model number WDF530PAYW0
Hi Jim,
Thank you for your question. If the clean light is not coming on at the end of the cycle, you may have a defective control panel or a loose connection.at the control panel lights. Check the connection and if it is fastened correctly, you will need to replace the control panel. We hope this helps! Good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
