Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11755212
This hose attaches to water pump assembly.
NOTE: As per the manufacture if the washer has an Eco Ball, it's no longer needed when the new hose is installed.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Opened the front panel with 3 crews T-25 or socket wrench. Panel comes off right away. Look for the leak. Determined it was the hose. Use power pliers to remove the clamp.The small clamp was easy. The big one I had to use my yoga to get to it. It probably would had been easy from the back panel but moving the machine requires brute force. Once the hose was out I found some bra under wires which is what probably punctured the hose. Removed the front filter and found a bunch of nails. Assembly was much easier and placed clamps so that if needed it would be a lot easier to remove and replace.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I romoved the front of the washer access panel. I then used the pliers to remove the clamps from the old hose and to replaceit with the new one.
REMOVE AND REPLACE. FLEXIBLE RUBBER CONNECTOR WAS NOT A EXACT REPLACEMENT, THE ORIGANIL HAD A BACK STOP VALVE, NOT SURE OF THE EFFICATE ON MACHINE.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.