Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Damaged Circuit Board led to constant beeping and F2 error message
Disconnect wires from old circuit board and attach them to the new circuit board. Unscrew old circuit board and reattach new one.
Errol from MIAMI, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michel
September 21, 2017
We had a bad thunder storm came through while we were away. When we came home we found our gas range beeping and a "fsei" flashing on the display and the oven making a sound and the oven door locked. We unplugged the range and left on vacation for a week. When we returned we plugged it back in and the same thing was happening. What is your opinion and do we need to replace the control board?
For model number WFG361LVQ0
Hi Micheal, Thank you for the question. You can try to unplug the power again for 60 seconds and then plug it back in, Set the oven to self clean and see if the latch will reset. If you still have the error the door latch would need to be replaced.The switches on the latch are giving a bad signal or the latch motor has failed.Hope this helps!
Was this helpful?
Thank you for voting!
Dave
February 4, 2020
Hi, I have a white stove and don't need the entire control panel. Do you sell the keypad separately? Thank you.
For model number WFG374LVQ1
Hello Dave, Thank you for the question. Very sorry but Whirlpool only makes the Keypad in black now and it is only included with the Control Board PartSelect Number PS11754598. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
