Quick Question!

Have you ever purchased from PartSelect.com before?

11753983-1-S-Whirlpool-WPW10380496-Motor Brush
11753983-1-S-Whirlpool-WPW10380496-Motor Brush http://www.partselect.com/Schematics/Whirlpool/4RJMBESC.gif

Motor Brush

PartSelect Number PS11753983

Used on Stand Mixers. Sold Individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Touchpad does not respond.

Compare At

$6.18

You Save

$1.03

Your Price

$5.15
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 4 reviews What's this?
1-4 of 4
 

49 of 53 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Robert from Minden, NV

Mixer was making clunking sounds and shaking

I removed screws in a sequence that I felt wouldn't further damage the mixer until I had it completely unassembled. When I found the broken worm gear, I went online to find a part. I found an exploded view, but the part numbering was old, and the salesperson couldn't tell me what the worm gear and bracket assembly consisted of, as I only wanted the worm gear. After trying to drive the pin out of the assembly, and failing, I decided to back online and see if anyone else had a photo of the assembly. Luckily (and wisely) PartSelect,com did and that answered any questions I had. The price was better, too. Reassembly of the mixer was a cinch with the exploded view. It's working like new, and we're hoping for another 35 years of service from it! Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16 of 22 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Lawrence from Antioch, CA

It stop working, mixer motor is not turning.

1st I check if there is a burnt smell, there was burnt smell from the board phase. Check the motor brush. Surely enough they're at max (not touching the motor anymore). Replaced both parts, put everything back together. Tested it, it works like a charm. It's been working for the last 2 weeks now!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

11 of 16 people found this instruction helpful

Parts Used:
  • Motor Brush
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Veronique from Loganville, GA

I broke the motor brush when I was taking my mixer apart for some serious cleaning

unscrewed the screw holding the old brush. carefully removed the spring and old broken brush. we did have some of the old brush left inside, so my husband used a very thin drill bit to break it up. then carefully inverted the stand mixer to allow the broken pieces to fall out. then we were able to install the new brush. works great. yeah!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 14 people found this instruction helpful

Parts Used:
  • Motor Brush
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Darcy from Eyota, MN

My kitchen aid mixer had one speed - high!

I actually didn't do the repair. I asked a friend who was a carpenter about what he thought was wrong with my mixer since it only had high speed which made mixing flour a snow storm. He said when his tools do that, it's the brushes. He ordered new ones and presto - my mixer works marvelously. He saved me from dumping a good mixer and $$$$$$$.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4