Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charles J - August 14, 2022
Verified Purchase
Perfect fit
Exactly what I needed and the mixer is back at full strength
★★★★★
★★★★★
William H - February 4, 2022
Verified Purchase
Part and the process for replacement suggests good design
I would have appreciated being warned that the carbon brush could come free from the spring holding it and drop uncontrolled....and break. I let mine drop on formica countertop.
★★★★★
★★★★★
Benjamin W. Tice, J - January 27, 2021
Verified Purchase
Super easy repair. Perfect part.
The shipping was very fast. The part worked exactly as represented. Couldn't have been better.
★★★★★
★★★★★
JON A M - January 6, 2021
Verified Purchase
Exactly as advertised.
The brushes were an exact fit. Decent price as well. Shipping was a bit delayed due to the pandemic but only by a few days.
★★★★★
★★★★★
Rochelle J - May 20, 2020
Verified Purchase
Very easy repair!
I purchased several parts but only needed the brushes, but will keep the other parts just in case for later! Parts came really fast. Will be ordering more brushes.
★★★★★
★★★★★
Joe K - July 9, 2019
Verified Purchase
Motor Brush replacement
Parts came when promised (3 days). Replacement was quick (5 minutes). Watch the video PartSelect provides and your job will be done quickly.
★★★★★
★★★★★
James H - June 24, 2019
Verified Purchase
Easy repair. Part fit perfectly
Part was a perfect fit. Repair was easy. The mixer works again. Thanks.
★★★★★
★★★★★
Bernard M - February 7, 2019
Verified Purchase
easy simple fast repair
the part was in great shape, got here fast, my machine is back in working order
★★★★★
★★★★★
Han X X - October 29, 2018
Verified Purchase
It's easy to replace my old one after find the right direction to insert the brush.
The brush part was coming on time to replace my old one.
★★★★★
★★★★★
Jason M - October 29, 2018
Verified Purchase
Easy repair
The new brushes worked well. Now my 35 year old kitchen aid mixer works like new! All the parts I ordered worked well. I rebuilt all the mixers electrical components during the build.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 16 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replaced a feb 1976 2 prong cord
Got a harvest gold mixer from g maw and thought a project would be nice we have several of these mixers in the family i knew a 2 prong cord was not safe so i took apart the mixer and wanted to regrease it just give a lookie to see what i needed and then i decided after watching video on y tube to convert to a solid state.
Parts
... Read more select as a whole has been very understanding as a whole and i will continue to get parts thru them they are genuine parts which is something i had to have i have 90% of my parts for a full overhaul we just cannot get the parts delivered fedex and usps i specify the address and they deliver 2 blocks east of the house thanks for honest neighbors usps was late as usual like i said parts select is outstanding at placing the order and appliances can be fixed super simple with the right tools the concern is with the fedex and usps now they are shorthanded but lets be real but when you deliver a package just triple check it is the right house !
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The mixer would not operate so I took out the brushes. Work afterwards but was a little noisy so, considering the advanced age of the machine and after doing research, I decided to replace the worm gear and bracket.
I followed the instructional video linked to my email order confirmation. Partselect provided one of the best how-to videos I've ever seen. With the right tools, a little patience and the video, I had an outstanding repair experience.
Found control backplate out of adjustment. Should be nominal 3/8".Broken speed control spring which attaches to backplate bottom. I recommend Loctite Blue to complement locknut's when adjusting RPM of "Stir" speed
Angel from JACKSONVILLE, FL
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
over heating
followed the emailed instructions from your company worked perfectly thanks
KATHERINE from INVERNESS, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burnt brushes
The brushes are located on each side of the tilt head of the mixer. I used a screwdriver to remove the screws, removed the brushes & replaced with the new ones. Runs great again!!
Sabrina from BUNKIE, LA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
None
I removed the spring loaded brush screw on the side of my mixer and lost it the next day. I found a schematic of this part on your website and ordered the four pieces that make up the brush screw(?). They arrived in just a few days and I referred back to the schematic to put it together. I then popped it in my mixer, screwed it down, plug
... Read moreged her in and away we go! Easiest repair I’ve ever done! I’m a 70 year old retired lady and not very handy, but this was an easy fix! Thank you, PartSelect!
Removed the rear cover to inspect the speed board. Replaced motor brushes and noticed the motor body nuts were loose and 1 was completely off. Cleaned up speed board and replaced the motor body nuts, tightened with nutdriver, adjusted speedboard governor screws and with new motor brushes worked like a charm. The very rough sounding mot
... Read moreor noise was gone and the mixer has not operated so quietly ever.
Mixer would only run Full Fast. Could not determine cause or fault.
1. Removed the mixer back plate Cover. 2. Removed the Speed Control Plate and retained spring, wires and ground wire. 3. Removed the old Speed Control Plate screws. Noted Control Plate pitted contact. 4. Removed old Triac Phase Control Board. 5. Removed old Governor. 6. Installed new Governor. 7. Installed new Phase Control Board
... Read more. 8. Installed new Speed Control Plate and retaining spring. 9. Reattached Speed Control Plate wires. 10. Adjusted Speed Control Plate Screws and set mixer speeds from Stir to maximum settings. 11. Replaced Motor Brushes on left and right side of mixer. 12. Reinstalled mixer back plate cover.
I removed the excess of grease to clear all parts. Then I installed new mechanical parts. Finally, I installed all electrical parts. I followed a logical sequence of removing and installing steps. Tip: Never remove parts without a logical order of sequence.
I noticed that the Initials on the package indicated that the part was made in CI. That was the problem.
I decided to update the motor brushes in our KitchenA id mixer even though it operated perfectly for years. After installing the motor brushes, you sent,I plugged the cord attached to the mixer into the outlet. I selected 1 on the speed selector and nothing occurred. The mixer would not operate. I then checked the outlet to insure ther
... Read moree was voltage present; there was voltage present. I again plugged the cord of the mixer into the outlet, selected 1, then 5, and finally 10, with no results. The mixer would not operate. Finally, I removed the motor brushes I had received from you and installed the old brushes that were originally in the mixer, plugged it in the outlet, selected 1 and the mixer operated perfectly as it did BEFORE installing the brushes you sent.
Read less
Gary from COLUMBUS, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alphonse Dauria
December 11, 2018
Can worn motor brushes make the mixer go really slow or not go at all
For model number Ksm90
Hello Alphonse, thank you for your question. Yes, worn brushes can cause the mixer to run slowly or not at all. Good luck with your repair!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Al
July 22, 2019
That is the only number i can see! Will the brushes fit an older model ? Are the brushes sold in pairs ?
For model number K45ss
Hello Al, thank you for inquiring. This Motor Brush is the correct replacement for your model K45SS. It is sold individually. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Elsa
January 3, 2020
The brush did not correct my problem with stand mixer. Does not start. What’s the next step. Please help. Thank you.
Hello Elsa, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
May 30, 2019
How does this part replaced in my mixer?
For model number E208019
Hello Bob, Thank you for the question. Here is a link to the How To Video. Hope this helps!
https://www.youtube.com/watch?v=bwnMFrKVK3g
1 person found this helpful.
Was this helpful?
Thank you for voting!
Christian
December 7, 2022
Mixer Carbon Brush replacement W10380496 dimension(H,W) are smaller than the original Carbon Brush that has a HC-39 stamped. If I use the replacement part W10380496 will it work or could it brake my Mixer?.
For model number K5SS
Hello Christian, thank you for your inquiry. This motor brush, part number PS11753983, will fit your model. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
