Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11752991
Note: As per manufacture a new screw is needed to mount door cam.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
First empty the shelves on the refrig. door. Then removed the upper hing cover and removed the three screws holding the hinge to the body of the refrigerator. Lifted the door off the bottom hinge and placed it clear of the unit.Inspected the bottom hinge and cleaned off the screw holding the closing cam, then with a nutdriver removed the screw holding the cam and removed the cam from the hinge. Installed a new cam closer, secured the cam with a screw. Hanged the door back on the lower hinge and re-installed the upper hinge. Job Complete!
Help other customers find the most helpful instructions.
Were these instructions helpful?
supported door with blocking and removed lower arm and cam. Replace cam and re installed arm.removed blocking from door and tested completed installtion of cam. all went well.
Removed the door, installed the lower cam & re-installed the door. Diagram & parts list correct. An easy repair.
i blocked up door took brakets off replaced plastic cams put back together door works like new one
Took off the top cap, undid the 3 screws holding the top door bracket on, took off the door, repshove the lower door closing cam pieces, and then put the door back on...piece of cake, dude.
Removed door,took out old part@replaced with new
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.