Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11752609
This is a drum support roller for a dryer. The part includes the drum roller only and does not include the tri rings. Although most dryers require two drum support rollers, this part is sold separately. It is recommended to check and replace both drum support rollers at the same time to ensure proper drum rotation and because they often wear at the same rate. The drum support roller holds the drum in the proper position while it spins on the support wheels. If rollers are worn out, they will cause the dryer to be noisy. This is a genuine replacement part.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
1. disconnect power,gas and vent lines2. pop off top of unit3. remove front of dryer4. lay unit on its back5. remove drum and replace pulley assembly,belt,drum rollers of which it has 2 rear and 2 front6. reverse above and then remove filter-vent housing and scrape off old seal install new seal7. re-connect power,gas and vent use again8. only sad part to whole job was seeing how cheaply whirlpool now makes thier products
Help other customers find the most helpful instructions.
Were these instructions helpful?
the job would have gone faster if the right parts had been sent in the first place. I would have never paid for two day shipping. In the repair, I removed the rear panel, clipped the plastic triangle holding the bearing, installed the new bearing and new clip.
The repair was fairly easy. The most timely part of the repair was removing the twelve screws from the back panel to expose the repair.
Removed the drum from the machine. This involved taking the dryer almost completely apart. However, it wasn't that difficult. The hardest thing was remembering where everything went to put it back together. So far so good. Replaced the read drum seal as this was the most likely cause of the problem. The rollers were replaced too since that was a possible cause and the machine would be apart anyway.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.