Quick Question!

Have you ever purchased from PartSelect.com before?

11752609-1-S-Whirlpool-WPW10314173-Drum Support Roller
11752609-1-S-Whirlpool-WPW10314173-Drum Support Roller 11752609-2-S-Whirlpool-WPW10314173-Drum Support Roller http://www.partselect.com/Schematics/Whirlpool/6WWZCWZ7.gif

Drum Support Roller

PartSelect Number PS11752609

Sold Individually. Most dryers require 2. Tri-rings sold separately.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.

Compare At

$12.86

You Save

$2.14

Your Price

$10.72
Order within the next 1 mins and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 4 reviews What's this?
1-4 of 4
 

44 of 60 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers, Wrench set
Customer: Jeff from Phoenix, AZ

Noisy and slow drum speed

1. disconnect power,gas and vent lines
2. pop off top of unit
3. remove front of dryer
4. lay unit on its back
5. remove drum and replace pulley assembly,belt,drum rollers of which it has 2 rear and 2 front
6. reverse above and then remove filter-vent housing and scrape off old seal install new seal
7. re-connect power,gas and vent use again
8. only sad part to whole job was seeing how cheaply whirlpool now makes thier products

Help other customers find the most helpful instructions.

Were these instructions helpful?   

14 of 17 people found this instruction helpful

Parts Used:
  • Drum Support Roller
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
Customer: Jeff from Mesa, AZ

Noisy drum

the job would have gone faster if the right parts had been sent in the first place. I would have never paid for two day shipping. In the repair, I removed the rear panel, clipped the plastic triangle holding the bearing, installed the new bearing and new clip.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 16 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers, Wrench (Adjustable)
Customer: John from Tucson, AZ

Worn out part

The repair was fairly easy. The most timely part of the repair was removing the twelve screws from the back panel to expose the repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 15 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Eric from Spring, TX

Clothes getting torn

Removed the drum from the machine. This involved taking the dryer almost completely apart. However, it wasn't that difficult. The hardest thing was remembering where everything went to put it back together. So far so good. Replaced the read drum seal as this was the most likely cause of the problem. The rollers were replaced too since that was a possible cause and the machine would be apart anyway.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4