Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Renita B - June 21, 2022
Verified Purchase
Ice Maker
Thank you for the prompt delivery of the Ice Maker; it fits perfectly and the Ice Maker is working properly.
★★★★★
★★★★★
Dennis L - February 20, 2020
Verified Purchase
ice maker
the part fit perfectly - worked perfectly.
★★★★★
★★★★★
Gary S - April 5, 2019
Verified Purchase
Easy repair
everything working fine
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Would not make ice.
Removed the whole ice maker unplug one wire harness replaced ice tray with new one. Very simple.
William from OTSEGO, MI
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original ice maker would make ice and then water would over flow into ice bin and freeze
first of all,i just want to thank parts select for sending me a second ice maker at no charge.after installing the first one and it didn't work,i talked with Heather and she sent me a new one.installation went the same as before.hardest part is getting the quick connect wire harness apart and the ice fill arm .it is working great and my h
... Read moreome is happy.thank you!
Read less
Michael from WALLA WALLA, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original ice maker would make ice and then water would over flow into ice bin and freeze
stick the very small screw driver in the hole on the left side cover and lift up to release the keeper tab,pull out to expose the wire connecter.insert the small screw driver in the slot on the left side to release the tab while pulling apart the two connectors.tuck the wires tight to side and pull out the ice maker.I thought I was gettin
... Read moreg the whole ice maker assembly,but just got a part of it,so I had take it apart and put it back together.the hardest thing to change over was the stop lever arm that senses the level of ice in the bin.after all this,it didn't work at all.not happy around here.back to filling ice trays
Read less
Michael from WALLA WALLA, WA
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
24 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Arnold
November 6, 2017
I have attempted to troubleshoot the ice maker in this model, as I have ice forming in the bottom of the ice bucket, and on the bottom of the cabinet that the ice maker is located in. During this process, there is a very small stream of water flowing out of the ice dispenser chute, which in turns flows down the front of the refrigerator. Reading the troubleshooting questions and watching the videos has not helped in the diagnosis of the problem.
For model number GI0FSAXVY011
Hi Arnold, Thank you for the question. This sounds like there is an issue with the Inlet Valve, PartSelect Number PS11752594. The valve is stuck open enough to allow water to flow through and leak causing the ice build up and the dripping from the dispenser. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Arquimides
August 13, 2019
The ice maker only large pieces together large strings together and does not come out of the crusher now the ice cabinet stock you can pull out stock I have this refrigerator for one year only i can believe it .
For model number WRX735SHDZ00
Hi Arquimides, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Adam
December 16, 2017
The ice maker has stopped working. I had a technician out to the house and he diagnosed a complete replacement. Do you have a diagram or explanation on how to swap out the assembly? It looks straightforward.
For model number KFIS20XVMS6
Hello Adam, Thank you for your inquiry. Although we do not have a video for this exact part, I have included a link for replacing an ice maker assembly for a similar model. Good Luck with your repair!
https://www.youtube.com/watch?v=hmCE3oKpEk0&t=22s
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
March 13, 2020
The ice maker fills completely and then auger then freezes over and won't dispense ice. What is the problem? We've tried to empty it more but still produces a lot of ice and the back of the auger freezes solid.
For model number MFX2571XEM3
Hello Mary, thank you for your question. From the description of your issue it sounds like the water valve is staying open too long and allowing too much water into the icemaker/bucket area. We would recommend replacing the water valve first, which is PartSelect Number PS11753408. Good luck with your repair!
Does the complete icemaker in diagram 100 come completely assembled and ready to install?
For model number MF12569VEM4
Hi Larry, Thank you for the question. Yes, the Ice Maker comes complete and ready to install. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Billy
January 23, 2019
Is the ice maker shown a straight swap?. is all wiring modular plugs or is any changing of the wiring harness required for installation. online videos show a fairly easy replacement process but some sites show wiring harness replacements when you order parts. for a full icemaker swap i would hope it would be a straight plug and play.
For model number MFI2670XEM0
Hello Billy, thank you for your question. from the information we have this would be a straight forward swap. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
November 30, 2019
How do i remove ice maker part "w10300024"
For model number gi0fsaxvvy011
Hello Patrick and thanks for writing.
We have attached the link to a repair video we think might answer some questions for you. We hope this helps. Please contact us anytime.
https://www.youtube.com/watch?v=ECdu8xqf0Ns
1 person found this helpful.
Was this helpful?
Thank you for voting!
Horst
August 20, 2021
Ice maker in refrigerator now is w10377151
Does wpw10300024 replace old one
Just want to make sure old one does not have switch in cover
That part looks different and no gear under cover showing
So maybe wiring change? Thanks
For model number Wrx735sdbm02
Hello Horst, Thank you for your inquiry. We have researched your model and this is the ice maker that is showing as compatible. As per the manufacturer, the new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dave
July 12, 2023
We had an indication to replace the filter on the front display and the unit stopped making ice. The filter was replaced with no resolution. We returned the new filter and replaced it with another new filter.
The results are the same, no ice, be we have water dispensing. Any ideas?
For model number WRX735SDHZ02
Hello Dave, thank you for a very interesting question. The issue is with the water inlet valve. If the water inlet valve is defective, or if it has insufficient pressure, it will not allow water to flow through. As a result, the ice maker will not make ice. Make sure that the water pressure to the valve is at least 20 psi. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve. If the water inlet valve has sufficient pressure and is getting power, but the ice maker won’t fill with water to make ice, replace the water inlet valve, part number PS11775241. We hope this information is useful!
HI, I'm wondering if you have a complete ice maker in stock for the above model number?
Thank you
For model number MFX2571XEM3
Hello Terry, thank you for your question. The ice maker compatible with your model is part number PS11752391. It is in stock. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
