Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11751313
This part connects the spray arm to the main water tube. Also known as a water supply tube.
Note: This part has been updated from the original.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Removed one screw which connects the upper spray arm mount, the spray arm feed tube, and the upper spray arm. Replaced with new parts ordered from partselect and it works as good as new. Highly endorse this website!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Eay repair. Replacement tube was one piece and only required removing one phillip's head screw to replace
unscrewed spray arm.snapped off inlet holder.snapped on new inlet holder.screwed on new spray arm.presto. it works.
Washer arm at the bottom was loose and flopping around and making waves when the bottom was full of water . This caused the dishwasher to appear to leak.For the Washer Arm Bearing Ring, First I removed the bottom drawer. Then I unscrewed the retaining screw with my fingers. and lifted off the wash arm. I then removed and replaced the Wash Arm Bearing Ring which looks like a top hat with the top cut out. The rim of the " hat " on the one I removed had completely worn away and looked like a 3/4 inch cylinder It took a couple. of minutes to figure out which part I really had to replace. I then put back the wash arm and tightened the screw back, replaced the drawer and everythig worked perfectly.For the Spray Arm Feed Tube, I first unscrewed the one screw holding the old tube in place. The old part was orginally in two parts. The new part is only one piece. I placed the new part in its place, and replaced the screw.
Unclipped broken holder from top rack. Removed one screw from feed tube and pulled tube off. Replaced with new parts that fit perfectly.
simply removed the old feed tube and the cracked holder, then replaced them with the new parts. machine works like new.
I removed one screw in the old spray arm and replaced the arm; then replaced the screw. My 'less than $10 part saved me the cost of a repair man. The dishwasher now operates as good as new. Max Briggs, Indianapolis
Unscrewed the broken one and just screwed the new one on.....really easy and now it works like new!
First I ordered the wrong part as it was changed to a kit. reordered new parts and recieved them in less than 24 hrs. Took about 5 minutes to finish the job. Thannks to the young lady I talked to for helping me to order the right part and I have a hard time hearing and her southern draw msde it harder to understand but worked with me and we got things done!!!!!!!!!
Removed one philips head screw. Installed new part,reinserted screw.
very easy to fix..i replaced many other parts while i was at it..figured i d "upgrade". washes much better now....less noisy..
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.