Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11750553
This water inlet valve supplies the water needed to both the water dispenser and the ice maker. A block in the valve could be what is keeping your machine from properly dispensing water, or making ice. Before you decide to replace this part, turn the household water supply to this valve off, and remove the input tubing to see if it is clogged. If so, clear the blockage to allow water back into the ice machine. If the ice maker is still not working properly, you may need to replace the water inlet valve. Remember to disconnect the power and water supply to your refrigerator before beginning this repair.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
just replaced the water inlet valve, it took less than 10 minutes. Ordering the part was just as simple, no hassle what so ever. Got the part as promised and installed it in minutes just as it was explained. I will come back to this site in a hart-beat.Thanks
Help other customers find the most helpful instructions.
Were these instructions helpful?
Simple to replace. Next fall I will be sure to drain the outdoor icemake and shut it down for the winter.
Received replacement valve ~ 3 days, easily replaced in less than 15min, works great
After turning off water to icemaker, defective control removed (two screws) and new unit installed.Worked perfectly.I was totally amazed when I ordered the part thursday afternoon and it arrived fridaY morning.Total time out of operation less than 24 hours.Wonderful results.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.