This bake element is found on the bottom of the oven.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when baking | Oven not heating evenly
This part works with the following products:
Wall Oven, Range, Microwave Oven Combo.
This part works with the following products:
KitchenAid, Whirlpool, Maytag, Crosley.
Part# WPW10207398 replaces these:
AP6017075, 9760768, W10207398
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
5.0
Filter By Rating:
5 Stars
4
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Shaunah P - December 28, 2020
Verified Purchase
Great part worked as it was intended
Fast delivery need better update on tracking
★★★★★
★★★★★
James H - October 20, 2020
Verified Purchase
Exact replacement part
part arrived in excellent condition and worked great VERY SATISFIED
★★★★★
★★★★★
Bruce B - April 22, 2020
Verified Purchase
fixed the problem
did what it was supposed to do
★★★★★
★★★★★
Jimmy M - February 21, 2020
Verified Purchase
Super support
Y'all were very helpful to me . I texted you on where the part went in my double oven. You sent me a picture on where it went. And how to change it out. It was called the hidden element and they were right
I did it my self and it went well. Thank you
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 1.4 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bad Bake Element
The existing bake element was charred and in pieces so could not be pulled out. We destructively disassembled the range and pulled out the pieces along with the melted insulation. The wall behind was also scorched.
Gary from NELLYSFORD, VA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Corroded bake element
Pull it away from the wall and take everything off the back. Unscrew the element cover, cut through the insulation and remove the part. Not easy, watch for sharp sheet metal edges
Tim from Langley, WA
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
21 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg
May 6, 2018
The bake element for this model is not inside the oven. Where is the access for this hidden bake element? I'm assuming it's in the back. Can you explain how to access and change the element. Please do not provide a link to the same video - it's not applicable to this model. Thank you.
For model number KESS907SSS04
Hi Greg, Thank you for the question. For the hidden element, you will need to pull the appliance out from the wall to access it from the back. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Jimmy
August 12, 2019
Do you have instructions on installation of part w10207398 for the model kdss907sss05 ?
For model number KDSS907SSS05
Hello Jimmy, Thank you for the question. You will need to pull the appliance out from the wall to access the panel on the back of the appliance. Once the panel is removed you will need to move the insulation away and bend down a tin panel that covers the back of the element. Remove the wire connectors and element and reverse the steps to reinstall. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
February 27, 2019
I am trying to replace the bottom hidden bake element on my KitchenAid oven and cannot for the life of me figure out how i am suppose to get it out. I have pull a few covers off the back and found the 2 element prongs sticking out the back and disconnected the wires. I move some of the insulation out of the way exposing 2 screws apparently holding it in. But now it will not come out any further and i am wondering if it is suppose to come out the front or the rear of the oven somehow. The video you keep listing to help people does not apply to this particular model.
For model number KESS907SSS04
Hi Mark,
Thank you for your question. There is a video on our website that you can reference on how to install the bake element. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Earl
April 25, 2019
How to install bake element part# wpw10207398
For model number kebs107sss04
Hi Earl, Thank you for your inquiry. There is a video on our website that you can reference on how to install the. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
LOU
February 25, 2019
How do i remove oven rack : Ps 12348730 for cleaning
For model number KEBS207SSS00
Hello Lou, Thank you for your question. This is a slide out oven rack. You simply need to lift the rack slightly then pull it out of the oven. Have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Linda
October 14, 2017
How do you get to the heating element to change it
For model number KDRS807SSS04
Hello Linda, thank you for contacting us. The bake element would be the bottom heating element in the oven. It would be exposed and fairly easy to access. We have a how to video that shows how to replace this part, you can follow the link below, hope this helps!
https://www.youtube.com/watch?v=aahcHBzTrk8
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jean
October 27, 2017
How do you remove oven bake element to replace
For model number KESS907SSS04
Hi Jean,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the. You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
March 2, 2020
Is there a video available to replace the bake element for this model ?
For model number Kesk901sss01
Hello, Thank you for your question. You will want to first remove the screws from the back of the element where the bracket is, and then you should be able to just pull it out. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jean
October 27, 2017
Are the oven bake element and warming drawer element the same element
For model number KESS907SSS04
Hi Jean,
Thank you for your question. They are not the same elements. I have listed the element for your drawer in a link down below. Good luck with your repair.
I can see broil element and warming drawer element bake element is not visible so how do i get to it
For model number KESS907SSS04
Hi Jean,
Thank you for your inquiry. The bake element would be the bottom heating element in the oven. It would be exposed and fairly easy to access. We have a how to video that shows how to replace this part, you can follow the link below, hope this helps! https://www.youtube.com/watch?v=aahcHBzTrk8. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
