Quick Question!

Have you ever purchased from PartSelect.com before?

11750369-1-S-Whirlpool-WPW10207397-Bake Element
11750369-1-S-Whirlpool-WPW10207397-Bake Element http://www.partselect.com/Schematics/Whirlpool/PWEWH1AX.gif

Bake Element

PartSelect Number PS11750369

The bake element is located at the bottom of the oven and gives off heat in order to bake evenly. If you notice that the element is not heating up or is not cooking evenly, it could be because it is broken or burnt out. All you need for this simple repair is a small screwdriver. To complete this repair, you will need to first turn the oven off (or shut off the house circuit breaker), remove the two screws that are holding the old element in place, remove the two wires from the old part, and then connect them to the new part and screw back into place.

This part works with the following brands: Whirlpool, KitchenAid.

This part works with the following products: Wall Oven, Microwave Oven Combo, Range.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Element will not heat.
  • Oven not heating evenly.
  • Will Not Start.

Compare At

$60.30

You Save

$10.05

Your Price

$50.25
Order within the next 8 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 8 reviews What's this?
1-8 of 8
 

57 of 66 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Daniel from Cheraw, SC

I broke the bake element while cleaning the oven.

I removed the two screws that held the bake element in place. Next I removed the Bake Element. I had to unscrew the oven to go behind it because when one piece off of the element broke, it slide back behind the oven. I pushed the wire back thru the piece holes, connected the Element, and pushed the element with the wires back through the holes. I rescrewed the element in place and the oven. PartSelect helped me to save this year's Christmas.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

30 of 31 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Shannon from Carlsbad, CA

Bottom oven element wasn't working

It was easy to remove the old element. It only required the removal of two screws and pulling apart the electric connectors. It was just as simple to install the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

23 of 28 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Dan from Madison, MS

Bake unit not heating properly

Turned the power to the oven off. Took two crews out. Disconnected the old unit, connected the new unit, put the two screws back in and tested the unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 16 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Lawrence from Atlanta, GA

Bake element was broken. Oven would not shut down.

I used a cordless screwdriver to remove the retaing screws. One of the connections was pucshed back too far and was almost hidden in the hole. I used the tweezers to pull it out, replace the bake lelement and the retaining screws. I'm good to go!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

12 of 16 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Eugene from Middleburg Heights, OH

Oven element

2 screws &2 push pull wires.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

11 of 14 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Sunil from Princeton Junction, NJ

Bake oven element was not heating up

With little reluctance..I decided to change the part myself..but was very satisfied...with two screws to detach the bake oven and install the new one.I was very happy to receive the replacement part within 24 hours of placing the order with Part select.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Denise from HIGH SPRINGS, FL

Bottom element not working.

Turned off breaker to oven. Removed 2 screws, used pliers to remove 2 wires from old element, replaced with new part, connected wires to new element and screwed in 2 screws. Turned on breaker, then oven and new element heated. Very easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Chon from El Campo, TX

Both heat element went out on my dryer and oven

easy part break down yall had. did not have it in my budget to buy both appliances, so found your web site. spent less than $100 to fix both. thanks, Chon

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-8 of 8