Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11750341
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
First I shut off the power to the stove at the house breaker panel. Next I removed the knobs for the burner controls and removed the two screws holding in each burner switch. Then I removed the two screws on the side of the panel and the four screws on the bottom of the panel. Then the panel could be pulled out to access the clock assembly. Setting the burner switches out of the way, I removed the four screws holding in the clock, unplugged the ribbon cable for the touchpad and removed the clock assembly. Next step was to remove the indicator lights for the burners, The light holders just slide off of the red lenses the stick thru the control panel. The lenses then push out of the panel. At this point the old panel is disconnected and you are ready to install the new panel in reverse order. The process was so easy, my nine year old grandson was able to help me.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Finally figured out that there were two side screws along with 4 bottom screws. Had to pull range out of island about 3". Turned off power then removed control panel and replaced infinite control. Took about 15 min. Took about 3 weeks to figure out where the two side screws were even after web search. Finally figured it out by pulling out range from island.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.