Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11749917
As per the manufacturer: the bracket will have to be removed from your old icemaker and reattached to your new icemaker. The cover is not included.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
I removed the old ice maker and replaced it with a new one and saved over $150. It was very easy and there is lots of ice now.
Help other customers find the most helpful instructions.
Were these instructions helpful?
First i unpluged unit from wall then removed the ice maker front door ,removed side cover with nutdriver 1/4,pressed the in on the the two releas clips on the botom of the unit then pulled the unit out the disconnected the cable.
Removed the 1/4" screw at right rear corner of the ice maker , pushed up on the springy lever on the left front under side and pulled it out far enough to unplug the power connector. This involves prying a tab on the connector so you can get iit apart. Then pulled out the ice maker and reassembled in reverse order. Point started working right away
I contacted your customer service. Nicole Allen is super. She helped me through quickly. Got the correct part number and went above the call of duty. She is a credit to your organization. Kudos.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.