Quick Question!

Have you ever purchased from PartSelect.com before?

11749890-1-S-Whirlpool-WPW10189703-Evaporator Fan Motor - 60Hz 120V
11749890-1-S-Whirlpool-WPW10189703-Evaporator Fan Motor - 60Hz 120V 11749890-2-S-Whirlpool-WPW10189703-Evaporator Fan Motor - 60Hz 120V 11749890-3-S-Whirlpool-WPW10189703-Evaporator Fan Motor - 60Hz 120V http://www.partselect.com/Schematics/Maytag/29707.gif

Evaporator Fan Motor - 60Hz 120V

PartSelect Number PS11749890

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. NOTE: This motor uses 2 brackets which are sold separately.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Fridge too warm.
  • Noisy.
  • Freezer section too warm.
  • Will Not Start.
  • Fridge and Freezer are too warm.
  • Freezer not defrosting.

Compare At

$57.98

You Save

$9.66

Your Price

$48.32
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 5 reviews What's this?
1-5 of 5
 

88 of 100 people found this instruction helpful

Parts Used:
  • Evaporator Fan Motor - 60Hz 120V
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Brian from Smock, PA

Fridge was warm. No air circulating at all. Food was spoiling fridge was just over 1 year old

First I removed the two screws that secure the guard in bottom back of the freezer and removed it . Next I removed the two screws that secure the guard on the back wall of the freezer and removed it. There are three wires connected to the motor, I unplugged those and removed the two screws that secure the motor and removed it. I swapped the grommets, blade and support bracket from the old motor. I put it back together in reverse steps and its working great. My mother-in-law can,t stop thanking me ! I saved her at least $400 to buy a new fridge. Thank You, Brian Miner

Help other customers find the most helpful instructions.

Were these instructions helpful?   

24 of 29 people found this instruction helpful

Parts Used:
  • Evaporator Fan Motor - 60Hz 120V
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Max from Waco, TX

Evaporator motor burned out

Very pleased with the delivery time. Was able to repair the refrigerator before the beer got hot. Replacement was easy.
Removed blower housing. Replaced motor. Put blower housing back in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 15 people found this instruction helpful

Parts Used:
  • Evaporator Fan Motor - 60Hz 120V
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Yvonne from modesto, CA

Evaporator motor burned out

Unplugged the machine removed the bottom plate and back plate and ice maker.Removed 2 wires to motor and ground wire.Removed 2 mounting nuts for motor,installed new motor and used old fan blade for new motor .Reinstalled in reverse order plugged in and tested fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 12 people found this instruction helpful

Parts Used:
  • Evaporator Fan Motor - 60Hz 120V
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: James from Aubrey, TX

Motor slowing down and speeding up off and on

Unplugged the machine removed the bottom plate and back plate and ice maker.Removed 2 wires to motor and ground wire.Removed 2 mounting nuts for motor,installed new motor and used old fan blade for new motor .Reinstalled in reverse order plugged in and tested fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 10 people found this instruction helpful

Parts Used:
  • Evaporator Fan Motor - 60Hz 120V
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: John from Blairsville, GA

Freezer not coolling properly. Lower temp. 2 degrees upper temp. 60 degrees.

Take bottom racks and baskets out of freezer. Remove back sheet metal panel, 8 screws. Remove motor and bracket, 2 screws. Umplug wires on motor. Remove two more screws to take mounting bracket off motor. Install in reverse order. Simple job. Maybe 20 minutes. Besure to shut freezer off before startin work.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5