Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11749476
Used in Mixers.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
1, Removed trim piece (1 screw) 2, removed cover (4 screws) 3, removed speed switch assembly (2 screws) 4, removed gear cover (4 screws) 5, removed and examined 2 worm gears for wear. Gear cover was badly cracked, don"t know if it was caused by a previous repair or by heat, as old cover is plastic. Received new parts and installed them, 2 bearings, 2 worm gears, 1 new cover of diecast metal and a new gasket. All repairs made with a #2 phillips screw driver. My wife then made bread, and it preformed flawlessly.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed mixer motor housing by removing 5 obvious screws.Removed plastic transmission cover by removing 4 obvious screws.Down load parts exploded drawing from PartSelect.comFound the worn part by the shiny teeth on the large gear.Found the large worm gear on the drawing and ordered the gear, and associated bearings. Did not need the seal.Removed worn part, assembled new gear and beargings in same manner as the worn part, and placed new part in mixer. Replaced transmission cover gasket.Repacked grease from transmission cover onto the new gear.Replaced transmission cover (4 screws).Replaced mixer motor housing (4 screws).Replaced mixer trim band around the motor houseing joing. (1 screw).Plugged it and and it works, good as new.
inspected and replaced worn components
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.