Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11748897
This clip is designed to hold a timer knob in place.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
I received the part next day, just as promised. I removed two screws to take the top panel off the washer, removed the two screws on the old timer and put the new timer in. Had the repair done withing 15 minutes - I have replaced this before, I am 54.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Lost Timer knob retaining clip & spring when I removed it before ordering. Put spring on, then knob then retaining clip. Problem solved.
Pulled knob off timer. Removed four screws at the top of the piece holding the timer in place. Pulled the wires out of the fitting. Then reversed procedure to put back together.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.