Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/MA51F7.gif
See part 016 in the diagram
http://www.partselect.com/Schematics/Maytag/MA51F7.gif

Motor Relay

PartSelect Number PS11748803

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$35.35

You Save

$5.89

Your Price

$29.46
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 2 reviews What's this?
1-2 of 2
 

5 of 6 people found this instruction helpful

Parts Used:
  • Motor Relay
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Gerard from East Hampton, NY

The se1000 dryer stop working.

The SE1000 (washer/dryer combo) dryer stop working and I checked the error code: 8E, which indicated a motor/relay circuit problem. I replaced the relay but I still have the problem. I'll have to check the motor but I think it's not available anymore. The belt is OK. The unit is 25 years old so it doesn't owe me anything.
The washer still works.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Motor Relay
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Stephen from Revere, MA

Dryer would not start

First I changed the motor relay. The dryer still didn't work. Then I checked the display board by pressing washer on/off and dryer on/off at the same time. Then I pressed the dry control on/off. This showed me that the display board was okay. Then I changed the control board. The dryer worked fine after that.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2