Quick Question!

Have you ever purchased from PartSelect.com before?

11748542-1-S-Whirlpool-WPW10117655-Switch, Push-To-Start
11748542-1-S-Whirlpool-WPW10117655-Switch, Push-To-Start 11748542-2-S-Whirlpool-WPW10117655-Switch, Push-To-Start 11748542-3-S-Whirlpool-WPW10117655-Switch, Push-To-Start http://www.partselect.com/Schematics/Maytag/XOJAMYBS.gif

Switch, Push-To-Start

PartSelect Number PS11748542

This part is used to start the dryer once you have selected a setting on the timer.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.

Compare At

$45.50

You Save

$7.58

Your Price

$37.92
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 1 reviews What's this?
1-1 of 1
 

55 of 65 people found this instruction helpful

Parts Used:
  • Switch, Push-To-Start
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Josh from Emory, TX

Push to start switch burned out due to electrical problem

Unplug from the wall ,remove upper back panel ( watch out for the grounding wire screwed to the panel), pulled off front knob, then twist and pull the switch out. Unplug the burned out switch, plugged in the new one. Re-assembled what I took apart, plugged her up and dried the load that was in the washer. Note: if yours is burned out due to house power surge make sure the timer is working after you replace the switch, you might need one of thoes too.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1