Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11748113
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Replaced worn parts with new ones ordered from your web site.
Help other customers find the most helpful instructions.
Were these instructions helpful?
followed the repair video
Just wanted to say that I was impressed with the service and speed of shipping.I order one day in the afternoon, and I received it the next day in the morning. Parts worked fine and I was able to fix my washer in 15 minutes following the video explanation in your site. I'm very happy, thanks!
I am a woman and not very experienced with large appliance repairs. This was very simple thanks to the diagram posted and the other comments. It saved us time, repair costs and a new washer for now. The ultimate recycling :). Thank you to all who posted
pull the fabric softener out and remove the bolt. remove the agitator assembly and replace the cogs. flip upside down to assemble and install the assembly. Reinstall bolt, cap, and softener. It was an easy fix.
Very easy had it working again in minutes. All parts fit perfect. Thank You!!
I pulled the cap off the top of the agitator, then I loosened the bolt with a socket wrench (with both extensions). Then I pulled off the entire agitator. I replaced the parts, following the directions. I probably really only needed the agitator dogs, but the other parts were kind of crudded up. I put it back together, and it worked like a charm. My washing machine was actually washing clothes by itself, without assistance from me!!!
Dispenser is a snap on. type Very easy to complete.
The cam in the agitator of the Whirlpool Ultimate Care II (LSQ7533JQ0) was a little different than the instructions and videos I could find on the web. The difference is that the cam has tabs that keep the cam in place with the agitator. I had to try to pry the tabs loose enough so that when I stood on the agitator base and then pulled up on the part of the agitator that pulls the clothes down, only then would the cam finally pop loose. Once I was able to do that, everything was easy to replace.
Removed agitator cap. Barrier was stuck, so I cut it in 2 by hammering a big knife in, then removing pieces. Removed screw and ifted out agitator in one piece. Separated top and bottom by standing on bottom and pulling up on top. Put bottom back in washer. Replaced thrust washer and other parts in agitator repair kit. and reassembled everything. (Used Gunk plumbers silicone grease instead of "dual action agitator grease".) Barrier cap came with O ring seal, so did agitator kit, so I didn't need the O ring I ordered. Ended up with 2 extras.
First, know that I am the least mechanical person in the world. Second, kudos to this website. Diagnosis was perfect, and the kit worked perfectly! If I were able to do this in under a half hour... anybody will be fine. Be sure to get the grease separately... I used silicone gel because that's what I had.Saved about $90 probably!
Fabric softener dispenser snaps in. Apply sideways pressure to snap out. Reach inside agitator and remove agitator cap barrier seal by pulling on tabs. Using socket with extension remove center bolt and rubber seal. Remove upper agitator assembly. Follow instructions provided in agitator repair kit to replace and re-install ratchet ratchet dogs and carrier. Reassemble in reverse of disassembly. Note: Apply a small amount of liquid dish washing detergent to agitator barrier cap seal to ease in re-installation.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.