Quick Question!

Have you ever purchased from PartSelect.com before?

11748108-1-S-Whirlpool-WPW10072840-Seal, Inner Cap
11748108-1-S-Whirlpool-WPW10072840-Seal, Inner Cap 11748108-2-S-Whirlpool-WPW10072840-Seal, Inner Cap http://www.partselect.com/Schematics/Maytag/TEBJZIYW.gif

Seal, Inner Cap

Compare At

$5.38

You Save

$.90

Your Price

$4.48
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11748108
Manufacturer Part Number WPW10072840
Manufactured by Whirlpool

This is an inner cap seal, but may also be known as an O-ring, and it is a part for your washing machine. Some symptoms replacing this part will fix include: leaking from your appliance, uncontrollable shaking and moving, loud noise, pumps but will not spin, or if your appliance will not agitate. This model is off-black in color and 3 inches in diameter. You will find this part inside the agitator in the middle of your washing machine. It is recommended to wipe down the barrier before putting the new seal on.

This part works with the following brands: Whirlpool, Kenmore, KitchenAid, Maytag, Roper, Estate, Inglis, Crosley, Amana, Admiral, Magic Chef.

This part works with the following products: Washer, Washer Dryer Combo, Dryer.

This part fixes the following symptoms:

  • Will not agitate.
  • Leaking.
  • Noisy.
  • Shakes and moves.
  • Pumps but will not spin.
  • Does not dispense fabric softener / detergent.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 74 reviews What's this?
61-74 of 74
 

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Beth from Thousand Oaks, CA

Agitator was not turning during every wash

I am a woman and not very experienced with large appliance repairs. This was very simple thanks to the diagram posted and the other comments. It saved us time, repair costs and a new washer for now. The ultimate recycling :). Thank you to all who posted

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: Charlie E from Canandaigua, NY

Agitator didn't work

I over ordered parts because this website doesn't list everything in the agitator repair kit... so I over spent about $10... so be careful of misleading parts list when ordering a "kit"... all the parts should be there. All I had to do was pop the top off, pull the cap out, unbolt the agitator and remove it... then put together the new dogs and rotator... ofcourse the kit cap with a new bearing (which wasn't listed on the included parts, so I have a spare for 15 years down the road) Then I lined up the holes, installed a new gasket on the bolt, and bolted it back together.... I also learned that I didn't even need the kit, I only needed new dogs! (that's the part that locks into the teeth on the agitator and caused it to spin and push the cloths down)... could have saved probably $20, but I fixed my washer myself and even though it cost me nearly $40 in parts and I'm sure I saved atleast $100 doing it myself... this site is very easy to navigate and find the parts... I will always come back to this site for parts!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Socket set
Customer: roger from cape coral, FL

Top half of agitator not working

popped off the the cap on top of agitator and then lossened nut with socket and exstenion and took off top half of agitator the replaced plastic gogs

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: Robert from Harrisburg, IL

Upper agitator was'nt turning--clothes werent getting clean

Thanks to the exploded parts diagram online, I was easily able to determine the sequence of how the parts went together. The whole thing was very simple, turned out, all I really needed was the "dogs", and the seal, but it was a breese. I have never really been a gearhead, but I do work construction, this was soo easy, even my brother in law could have done this. I have to believe that a service call to fix this would have been $100-$200 dollars, this cost me less than $30

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Refugio from Perris, CA

When washing loads the clothes were not moving.

The agitator was not turning the clothes so I bougth the agitator kit and was an easy fix. Took me about ten minutes to installed. What was best was the price, under fiftheen dollars. With the economy this bad fitheen dollars was cheaper than buying a new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: FEDERICO from RIDGECREST, CA

Agitator ratchet in-op.

Followed the "pictures" and was easy enough.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Socket set
Customer: Gary from Orlando, FL

Dogs worm not contacting outer gear

removed cap on top of agitator, removed inner cap
with pliers-it has a large o-ring, removed bolt that
holds agitator onto drive assembly with a 1/2 "
socket ,extension and rachet. removed old parts
and installed new ones. install a new rubber washer with bolt and a new o-ring with inner cap.
place cap on top of agitator and your done

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: JESSE from BIG SPRING, TX

Dispenser was shaking, ratlling

Dispenser is a snap on. type Very easy to complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Susan from Springfield, IL

Top part of agitator not working

Removed agitator cap. Barrier was stuck, so I cut it in 2 by hammering a big knife in, then removing pieces. Removed screw and ifted out agitator in one piece. Separated top and bottom by standing on bottom and pulling up on top. Put bottom back in washer. Replaced thrust washer and other parts in agitator repair kit. and reassembled everything. (Used Gunk plumbers silicone grease instead of "dual action agitator grease".) Barrier cap came with O ring seal, so did agitator kit, so I didn't need the O ring I ordered. Ended up with 2 extras.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: James from Hobbs, NM

The agitator was badly worn

pulled the softner dispenser, removed the o-ring seal cap, pulled removed the assembly bolt, removed the agitator rotator assembly, replaced worn componants with new while reversing the process.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Joseph from Equinunk, PA

Agitator failure

Diagnosing the problem took a couple of hours, because the fabric softener dispenser was so full; I tried to pry it apart but to do that I had to destroy it!:-) While I was cleaning the place for the dispenser I decided to take off the cover, clean out everything - then ordered the parts. Once the parts arrived I watched the video for assembly ... and the rest was easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

24 of 699 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: peggy from johnston, RI

Agitator top not working

Repair was very easy for me and I have three fingers missing on one of my hands. Video on repair was also very detailed. I ordered three extra parts that were already included in the agitator kit. Would have been nice if all parts were listed that came in the kit and add a small tube of the grease. Delivery time was great! I would order from this company again, I was very pleased. I have already referred a friend to the site for her repairs.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

21 of 696 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Socket set
Customer: Timothea from Buckeye, AZ

Washer machine wouldnt wash

Turns out the agitator directional cogs were really worn and chipped so they werent allowing it to rotate therefore my clothes were not comming out clean. Also upon taking apart the agitator i saw that the fabric softener dispenser was VERY clogged with gunk! I had bought this appliance used so i really had no idea.
So first i removed the fabric softener dispenser, then the cap then i loosened the 7/16th bolt to release the top 1/2 of the agitator and then took the dogs (or cogs as other people call them) out and replaced them, then did the steps in reverse to put it back together. Before i put it together i had to really clean all the gunky build up.
Works like a charm!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

44 of 1312 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Socket set, Wrench set
Customer: Mary from Madisonville, KY

Washer would not spin

took off back and sides to the washer. laid the washer on it's back and removed worn and broken parts. replaced these parts and put everything back together. The top part of the agitator hasn't worked in a while, while we had it apart we also replaced the clogs. The washer works better than it has in a long time. Spins a lot more water from the clothes which makes drying faster. I would surely do this again. A lot cheaper than a new washer.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

61-74 of 74

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11748108
Manufacturer Part Number: WPW10072840
Brand Model Number Description
Kenmore110088732791Washer Dryer Combo
Kenmore11015942400Washer
Kenmore11015942401Washer
Kenmore11015944400Washer
Kenmore11015944401Washer
Kenmore11015952400Washer
Kenmore11015952401Washer
Kenmore11015954400Washer
Kenmore11015954401Washer
Kenmore11015962400Washer
Kenmore11015962401Washer
Kenmore11015964400Washer
Kenmore11015964401Washer
Kenmore11016922500Washer
Kenmore11016922501Washer
Kenmore11016922502Washer
Kenmore11016922503Washer
Kenmore11016922504Washer
Kenmore11016942500Washer
Kenmore11016942501Washer
Kenmore11016942502Washer
Kenmore11016942503Washer
Kenmore11016962500Washer
Kenmore11016962501Washer
Kenmore11016962502Washer
Kenmore11016962503Washer
Kenmore11016964500Washer
Kenmore11016964501Washer
Kenmore11016964502Washer
Kenmore11016964503Washer