Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11747963
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
First: I unplugged the dishwasher.Second: I removed the two screws that hold the dishwasher in place under the counter.Third: I pulled the dishwasher out in order to see the sides of the doors where the springs hold the door attached to the dishwasher.Fourth: I removed the worn springs with needle nose pliers.Fifth: I attached the new springs where the old springs were attached.Sixth I tested to see how the door functioned with the new springs.Seventh: I repositioned the dishwasher under the counter and secured it with the screws that I removed in step 2
Help other customers find the most helpful instructions.
Were these instructions helpful?
I unscrewed the dishwasher brackets (2 of them) from under the counter, slid out the dishwasher. The springs (or broken springs) were visible. I removed them, popped the new ones in and viola!!! The door sprung up like it was new. Of course I slid the dishwasher back under the counter and put the screws back in. This took 15 minutes. I couldn't believe how easy it was. A repair man wanted to charge us $75 just for a service call (plus parts). I repaired for less than $25!!!!
Removed the bottom plate beneath the dishwasher door and the two top screws that held the dishwasher in place. Pulled the dishwasher out from the cabinets and removed the old springs. Attached the new springs to the linkage and slide the dishwasher back in place. Reattached the bottom plate and the two top screws. Done!
Remove the screws securing dishwasher to cabinetry; slide the machine out; hook spring into chassis; stretch spring using pliers and attach to arm on washer door. Push the machine back into place, replace screws. Very easy. The spring was delivered in about two days. Piece of cake.
unscrewd screws at the top; grasp the inside top, lifted & pulled out far enough to view springs; checked way they were fastened as there are several holes fot the springs; using pliers, replaced old with the new
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.