Quick Question!

Have you ever purchased from PartSelect.com before?

11747958-1-S-Whirlpool-WPR9800384-Single Shelf Holder
11747958-1-S-Whirlpool-WPR9800384-Single Shelf Holder 11747958-2-S-Whirlpool-WPR9800384-Single Shelf Holder 11747958-3-S-Whirlpool-WPR9800384-Single Shelf Holder http://www.partselect.com/Schematics/Maytag/32562.gif

Single Shelf Holder

PartSelect Number PS11747958

This support stud is sold individually. It is used to hold up wire shelves in refrigerators.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$7.48

You Save

$1.25

Your Price

$6.23
Order within the next 3 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 2 reviews What's this?
1-2 of 2
 

2 of 7 people found this instruction helpful

Parts Used:
  • Single Shelf Holder
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Craig from Swansea, MA

One of the shelf plastic holder was broken

I was able to find the part on line and within a few days received the part and installed it with no problems thanks to the website drawing information.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 13 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Gwynn from Calvert City, KY

Microwave was sparking & fire going up the side

After reading on-line about other Amana microwaves, that said the arching was probablly due to dirt or grease & I knew it wasn't dirty, I decided to try the sandpaper recommended to clean the carbon from the wall where the shelf holder had burned several years ago. This caused the remainder of the clip to become loose. I then took a sharp knife & popped the clip out which left a neat square hole which your shelf holder popped right into. The filters were an afterthought because I didn't want to pay shipping for only a $2 item

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2