Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11747956
The light bulb in your microwave allows you to see inside the main compartment, and should come on automatically when you open the door. If your light bulb is not performing this function, you may need to replace the bulb. This light bulb is 3 inches long, is made of metal and glass, and is 40W. Many of our customers have rated this repair as easy. To complete the repair, first remove the glass cover if your microwave has one. Then simply unscrew the old bulb and replace it with the new one. Be sure to disconnect power to the microwave before you begin this repair. Also, if the old bulb was broken, be sure to remove any pieces of glass in the microwave before you use it again.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten
Help other customers find the most helpful instructions.
Were these instructions helpful?
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.