Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/32562.gif
See part 141 in the diagram
http://www.partselect.com/Schematics/Maytag/32562.gif

Light Cover - Clear

PartSelect Number PS11747943

Surface light cover protects and covers the cooktop light under the microwave. The light cover is made of clear plastic which can become cracked or damaged from constant use of the microwave. This repair is relatively easy. To replace the part, simply unscrew the old light cover and replace it with the new one. This OEM replacement part measures approximately 4 inches (W) x 4 inches (L). Remember, the light bulb inside the microwave can be hot, so use caution when performing this repair. Note: As per the manufacturer the original cover was made with one hole. The part is now made with three holes.

This part works with the following brands: Amana, Maytag, Jenn-Air.

This part works with the following products: Microwave.

Compare At

$5.87

You Save

$.98

Your Price

$4.89
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 4 reviews What's this?
1-4 of 4
 

6 of 8 people found this instruction helpful

Parts Used:
  • Light Cover - Clear
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Christopher from Rochester, NY

Light cracked

Removed the screw and took the broken light piece off. I replaced it with a new lamp cover, and re-inserted the screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: J MERVIN from STRASBURG, PA

Broken lamp cover

removed old covers which were cracked and dirty.
the repair part looked exactly like the original but did not fit correctly. i had to do some changing of the size to make it fit. it does not clip in place as it should but we are living with it as it does cover the light bulb. the grease filter is perfect

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Light Cover - Clear
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Ronald from CAMPBELLSPORT, WI

Light covers yellow and cracked

Removed screws. replaced bulbs with led bulbs install new covers replace screws led bulbs no heat wont crack covers

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
  • Light Cover - Clear
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Peggy from Hastings, MN

The cover to my lamps both broke.

Had to put one screw in each. A little hard to reach up. also hard at first to get them in.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4